DEDICAM Product Catalog

Valid from July 2019 PRODUCT CATALOG INTERNATIONAL DEDICAM® PROSTHETICS

2 DEDICAM Product Catalog 20154 ALL FROM A SINGLE SOURCE. And CAD/CAM is so easy with CAMLOG Working digitally is becoming increasingly important in the dental industry. Computer-aided reconstruction and the accompanying process optimization as well as feasible product optimizations offer unprecedented opportunities in a highly dynamic market. With CAMLOG, you have one contact partner, one manufacturer as well the DEDICAM® Service Center for individualized, high-precision dental restorations at your side - and all in proven quality. Personal support and a process optimized right down to the finest detail ensure a high quality of service and results with the greatest possible individual freedom. Discover your options and start your digital future with DEDICAM.

DEDICAM Product Catalog 2015 3 4 Customary top CAMLOG quality DEDICAM products impress with CAMLOG quality – they are delivered quickly and reliably to you in the laboratory. Our focus is on you and your specific individual needs and requirements. See for yourself. You can find detailed information at www.camlog.de/ cadcam. Special Releases A data check of all CAD files transferred to CAMLOG is an existential and safety-relevant barrier. Should any anomalies regarding the material or construction-specific parameters become apparent during this examination, we will inform you immediately. You will then have the opportunity to optimize the design and the corresponding order, or to issue a special release. A special release, however, has the consequence of invalidating the warranty and guarantee Claims. Understandbly, we cannot assume any liability for products that no longer comply with the instructions for use of the materials or associated products. Such a product is not delivered with a manufacturer's declaration, but with a manufacturer's assessment. Custom-made products from CAMLOG under the DEDICAM brand All patient-specific DEDICAM products are custom designs as defined by the German Medical Devices Act (MPG) and are declared as such. Every custom-made product is accompanied by a manufacturer's declaration or manufacturer's assessment. This relieves you of the documentary burden of generating the declaration of conformity. Your assigned patient ID, the tooth position and our article number are given on all our documentation: • Order confirmation • Delivery note • Invoice • Manufacturer's declaration or manufacturer's assessment • Product label We comply with the basic requirements of Guideline 93/42/EEC, Annex I as well as ISO 13485. Next to complying with Good Manufacturing Practice (GMP) our production aims for a "Zero fault strategy". Even in the CAD/CAM manufacturing of unique DEDICAM brand products, we fully comply with the industrial process reliability and quality of CAMLOG. CAMLOG takes responsibility for more safety and assures transparency for all those involved in patient therapy. Note on product availability Not all products are available in all countries.

CAMLOGIS AN AUTHORIZED MILLING PARTNER As an »Authorized Milling Partner« (AMP) we can offer you products made of exceptionally well scientifically documented materials from Ivoclar Vivadent (publications on the subject are available from the Download Center of Ivoclar Vivadent AG). »Authorized Milling Partners« are manufacturing centers approved by Ivoclar Vivadent and with coordinated processes. You will benefit from: • high precision restorations with excellent surface quality • high quality standards: material and restoration are scientifically tested • matched product and system solutions to complete the restorations As part of the »Authorized Milling Partner« program, CAMLOG gains access to Ivoclar Vivadent's excellent range of materials. For example, these include the patented lithium disilicate glass ceramics IPS e.max® CAD, the tried and tested full ceramic for single tooth restorations IPS Empress® CAD, the versatile zirconium oxide IPS e.max® ZirCAD, as well as the quality plastic Telio® CAD, which is suitable for a broad range of temporary restorations. The »Authorized Milling Partner's« digital process chains are geared to processing Ivoclar Vivadent materials and their properties. Quality is created when all processes have been tested and perfectly coordinated. And precisely this is the outcome of the CAMLOG/Ivoclar Vivadent symbiosis. In addition to the products, you will receive tested construction parameters which are set up in the CAD software or can be uploaded via the DEDICAM materials library. The detailed parameters are matched to the material in combination with the indication and our manufacturing processes. These take key data into account, such as the minimum wall thickness, connection cross section, cement gap and milling radii. This combination of product quality and manufacturing knowhow results in an excellent and long-lasting product for clinical success for both you and your patients. 4 DEDICAM Product Catalog 2019

CONTENT Team Approach 6 Manufacturing Service 7 DEDICAM implant prosthetics 8 One-piece abutments for CAMLOG and BioHorizons implant systems 11 Scanbodies for scanning at implant level 14 Scanning caps for scanning on prefabricated abutments 16 One-piece abutments for other implant systems 19 One-piece gingiva formers for CAMLOG and BioHorizons implant systems 23 One-piece gingiva formers for other implant systems 27 Mesostructures for titanium bases for CAMLOG and BioHorizons implant systems 31 Gingiva formers for titanium bases for CAMLOG and BioHorizons implant systems 33 Crowns for titanium bases (suprastructure) for CAMLOG and BioHorizons implant systems 35 Crowns for titanium bases, temporary (suprastructure) for CAMLOG and BioHorizons implant systems 37 Restoration options on titanium bases of various manufacturers 38 Bridges for titanium bases for CAMLOG and BioHorizons implant systems 41 Bars for titanium bases for CAMLOG and BioHorizons implant systems 45 Insights into production 47 Directly screw-retained bridges for CAMLOG and BioHorizons implant systems 49 Directly screw-retained bridges for other implant systems 51 File-splitting – abutment and framework / crown 52 Directly screw-retained bars for CAMLOG and BioHorizons implant systems 55 Directly screw-retained bars for other implant systems 57 Bridges for CAMLOG/CONELOG bar abutments 59 Bridges »Passive-Fit« for CAMLOG/CONELOG bar abutments 61 Bridges and bars for multi-unit abutments 65 Bars for CAMLOG/CONELOG bar abutments 69 Bars »Passive-Fit« for CAMLOG/CONELOG bar abutments 71 Quality advantage 72 Quality assurance 73 Bar profiles and attachments 75 DEDICAM prosthetics 78 Inlays, onlays and partial crowns 81 Veneers 82 Crowns and anatomical bridges 83 Frameworks for crowns and bridges 87 Double crowns 91 Overview screws and analogs 92 Material 94 Overview shades and grades of translucence 99 Overview product portfolio prosthetics 102 Further documentation 103 5 DEDICAM Product Catalog 2019

TEAM APPROACH "Backward planning" is the underlying concept in implant dentistry for long-term stable reconstructions and satisfied patients. For many years we have been supporting the various dental disciplines in their roles and tasks. This is why we rely on the team approach by bringing together the teams of therapists and cooperating with them to design successful prosthetic reconstructions for the patients. This way we ensure that the know-how of all parties involved is reflected in the digital planning process. SURGEON CAMLOG DENTAL TECHNICIAN ADDITIONAL PARTNERS PATIENT PROSTHODONTIST 6 DEDICAM Product Catalog 2019

Perfectly matched material properties and processing parameters Use of innovative materials Realization of complex reconstructions Reproducible results Optimization of laboratory workflows Data check for greater safety Better competitive positioning through use of the latest technologies Regardless of the status of your business, DEDICAM services can be used as an "extended workbench": You have a scanner and CAD software - we process your data You have a machining unit - we process the materials you cannot process You are positioned on the market as a manufacturing service provider - we act as back-up to cushion your production peaks or downtimes Registration Ma Schritt Schritt Schritt Schritt Step 01 Step 06 Step 02 Step 05 Step 03 Step 04 ing Acc Designreview&Manufacturing Order placement Import CADli Advantages Customer CAMLOG 7 DEDICAM Product Catalog 2019

DEDICAM IMPLANT PROSTHETICS The prosthetic restoration of implants is one of CAMLOG's core competences. The declared goal is to achieve the best possible quality of results and to create the Optimum conditions for this. The DEDICAM CAD libraries are an elementary part for ensuring the fit of implant-prosthetic constructions. These are matched to the CAMLOG®, CONELOG®, iSy® and BioHorizons® Internal Implant Systems as well as other systems from leading manufacturers. With DEDICAM, CAMLOG provides you with custom-made products in CAMLOG quality. DEDICAM offers different solutions for the direct restoration of implants. Custom-made one-piece abutments made of titanium alloy (Ti6Al4V) are available, as are mesostructures made of ceramic materials, which you can combine to a two-piece abutment with a titanium base CAD/CAM. Anatomical crowns for titanium bases are an esthetic alternative in the case of suitable implant positioning. For this type of restoration one can choose between the IPS e.max CAD, IPS e.max ZirCAD materials as well as Telio CAD for temporary restorations. An individual gingiva former is a suitable solution for designing the emergence profile effectively as well as time and cost-saving. In the fully digital workflow, this gingiva former can also be used intraoperatively or after exposure of the healed implants to avoid elaborate soft tissue management if applicable. Primary splinting of several implants can be achieved with directly screw-retained implant bridges and bars. These are occlusally screw-retained directly on the implant shoulder. Divergences in implant angulations are compensated with the aid of modified implant connection geometries. Alternatively, bridges and bars can be screw-retained occlusally onto prefabricated bar abutments or multi-unit abutments. For the construction of occlusally screwretained bridges and bars on implant shoulders or abutments, the model is remeasured with high-precision scanners and the scan data combined with the CAD data, if you so wish. Consequently, possible inaccurarcies of the laboratory scanner can be compensated. Titanium bonding bases are available for CAMLOG and CONELOG bar abutments. Bridges and bars for these bonding bases are bonded in the mouth. This proven »Passive-Fit technique« ensures a tension-free fit of the construction and thus perfect precision. Indication-relevant implant bridges and bars are available made of CoCr, titanium alloy, IPS e.max ZirCAD and Telio CAD. The implant bridges can be veneered with suitable ceramics or plastics, depending on the material. The one-piece abutments, one-piece gingiva formers and directly screw-retained bridges and bars are supplied with abutment screws, CAMLOG and BioHorizons structures on titanium bases with the titanium bases and restorations on bar and multi-unit abutments with prosthetic screws and, if necessary, titanium bonding bases. The DEDICAM CAD libraries allow the design of implant-prosthetic restorations under consideration of material-specific properties. This adds to the safety and durability of the product. 8 DEDICAM Product Catalog 2019

9 DEDICAM Product Catalog 2019

10 The optimal placement of the cervical shoulder allows excellent esthetics and easy removal of the subgingival excess cement M 1.4 mm threaded hole for horizontal screw retention optional Anatomical shaping supports the soft tissue and gives the emergence profile a perfect form. Original connection for: CAMLOG implant system CONELOG implant system CERALOG Hexalobe implants iSy implant system BioHorizons Internal implants DEDICAM Product Catalog 2019 Titanium | Ti6Al4V One-piece abutments 11 One-piece gingiva formers 23 Bridges for titanium bases 41 Bars for titanium bases 45 Directly screw-retained bridges 49 Directly screw-retained bars 55 COMFOUR bridges 59 COMFOUR bridges, passive fit 61 Bridges and bars for multi-unit abutments 66 COMFOUR bars 69 COMFOUR bars, passive fit 71 Crowns and anatomical bridges 83 Frameworks for crowns and bridges 87 Double crowns 91 IPS e.max ZirCAD for CERALOG One-piece abutments 13 One-piece gingiva formers 25

11 DEDICAM Product Catalog 2019 DEDICAM one-piece abutments are designed with the original DEDICAM one-piece CAD library in the suitable CAD software and the corresponding module. To utilize our wide-ranging CAD libraries it is necessary to use our scanbodies or iSy multifunctional caps respectively (see pages 14 - 16). The individual design of the one-piece abutment is similar to a prepared tooth stump and the anatomical design allows for a natural emergence profile. This lends optimal support to the soft tissue. This enables compensation of unfavorable implant positions/axial divergences. The cervical shoulder can be prepared in an ideal manner and thus allows easy removal of excess cement and achieves outstanding esthetics. A horizontal thread drill hole M1.4 can be provided individually for screw-retained restorations in titanium abutments. The thread is compatible with the “Bredent screw” (article number 33000700; available at your local Bredent distributor). IMPLANT PROSTHETICS One-piece abutments for CAMLOG and BioHorizons implant systems Material Titanium alloy (Ti6Al4V) Zirconium oxide (only CERALOG abutments) Notes All DEDICAM one-piece abutments are supplied with an abutment screw, CERALOG abutments with the titanium or gold screw selected in the CAD library or order portal. Construction as primary part of a double crown restoration is possible. One-piece CAMLOG abutments precision milled or polished, incl. abutment screw Diameters: 3.3 mm 3.8 mm 4.3 mm 5.0 mm 6.0 mm Material: titanium alloy (Ti6Al4V), precision milled One-piece CAMLOG PS abutments* precision milled or polished, incl. abutment screw Diameters: – 3.8 mm 4.3 mm 5.0 mm 6.0 mm Material: titanium alloy (Ti6Al4V), precision milled Material: titanium alloy (Ti6Al4V), polished (subgingival region) Material: titanium alloy (Ti6Al4V), polished (subgingival region) CAMLOG® Implant System CAMLOG® Implant System PS: Platform Switching * The PS abutments may only be used in conjunction with CAMLOG Implants with "K article numbers". precision milled precision milled polished polished

12 DEDICAM Product Catalog 2019 IMPLANT PROSTHETICS One-piece abutments for CAMLOG and BioHorizons implant systems One-piece CONELOG abutments precision milled or polished, incl. abutment screw Diameters: 3.3 mm 3.8 mm 4.3 mm 5.0 mm Material: titanium alloy (Ti6Al4V), precision milled Material: titanium alloy (Ti6Al4V), polished (subgingival region) CONELOG® Implant System precision milled polished One-piece iSy abutments precision milled or polished, incl. abutment screw Diameters: | 3.8 mm | 4.4 mm | 5.0 mm | Material: titanium alloy (Ti6Al4V), precision milled Material: titanium alloy (Ti6Al4V), polished (subgingival region) iSy® Implant System precision milled polished One-piece BioHorizons abutments for tapered internal and internal implants, precision milled or polished, without Laser-Lok®, incl. abutment screw Material: titanium alloy (Ti6Al4V), precision milled Material: titanium alloy (Ti6Al4V), polished (subgingival region) BioHorizons®

13 DEDICAM Product Catalog 2019 One-piece CERALOG abutments for CERALOG Hexalobe implants, polished, pure white (MO 0; corresponds to VITA shade guide BL1 to BL4) or stained (MO 1; corresponds to VITA shade guide A1/A2), abutment screw made of titanium or gold alloy must be selected via the CAD library or the ordering platform, and is supplied and charged separately. Unlike the assembled CERALOG PEKK abutments, the customized abutments made of zirconia rest - due to the material - exclusively on the horizontal surface of the shoulder of the CERALOG Hexalobe M implants. Material: IPS e.max ZirCAD for CERALOG (zirconium oxide, monochromatic) CERALOG abutment screws for the final screw-retention of one-piece CERALOG abutments and gingiva formers in the CERALOG Hexalobe implant Material: titanium alloy (Ti6Al4V) CERALOG® Implant System CERALOG® Implant System Threaded holes M1.4 use DEDICAM CAD library for one-piece titanium abutments, the thread is compatible with the “Bredent screw” with article number 33000700, available at your local Bredent distributor Material: Holisticor (gold alloy) MO 0 MO 1

14 DEDICAM Product Catalog 2019 CAMLOG scanbodies sterile, can be used without scan spray, incl. abutment screw Material: PEEK (poly ether ether ketone) CONELOG scanbodies sterile, can be used without scan spray, incl. abutment screw Material: PEEK (poly ether ether ketone) iSy scanbodies sterile, can be used without scan spray, incl. abutment screw Material: PEEK (poly ether ether ketone) CERALOG scanbodies non-sterile, can be used without scan spray, incl. titanium abutment screw Material: PEEK (poly ether ether ketone) SCANBODIES for scanning at implant level The scanbodies are used for optical three-dimensional localization of implants in the mouth and implant analogs in the working model. This enables an exact transfer of the implant position to the suitable CAD software. The scanbodies for the CAMLOG, CONELOG and iSy implant systems are delivered sterile and also allow immediate intraoral use. The scan geometries of the scanbodies are part of the DEDICAM CAD libraries for all implant-supported restorations. Exception: in the case of bridges and bars occlusally screw-retained to abutments, the scanning caps are on file as geometries (see page 16). * can also be used for Platform Switching Manufacturer Implant system Implant [mm] Scanbody, labeling Scanbody, article number CAMLOG Ø 3.3 Ø 3.3 K2610.3310 Ø 3.8 Ø 3.8 K2610.3810* Ø 4.3 Ø 4.3 K2610.4310* Ø 5.0 Ø 6.0 Ø 5.0 / 6.0 K2610.6010* Ø 3.3 Ø 3.3 C2600.3310 Ø 3.8 Ø 4.3 Ø 3.8 / 4.3 C2600.4310 Ø 5.0 Ø 5.0 C2600.5010 Ø 3.8 Ø 4.4 Ø 5.0 iSy P2600.0001 Ø 4.5 without D1254 (being discontinued), H2610.4580 CAMLOG® Implant System CONELOG® Implant System iSy® Implant System CERALOG® Implant System

15 DEDICAM Product Catalog 2019 SCANBODIES for scanning at implant level Scanbodies for other implant systems non-sterile, can be used without scan spray, incl. framed fixing screw Material: PEEK (poly ether ether ketone), titanium alloy (Ti6Al4V) Internal scanbody with snap-in function non-sterile, can be used without scan spray Material: PEEK (poly ether ether ketone), titanium alloy (Ti6Al4V) Nobel Biocare® Brånemark System® Mk III Narrow Platform (NP) Ø 3.5 6A-A D0064.5491 Regular Platform (RP) Ø 4.1 6A-B D0064.5492 Wide Platform (WP) Ø 5.1 6A-C D0064.5493 NobelActive® Narrow Platform (NP) Ø 3.5 2B-A D0064.5499 Regular Platform (RP) Ø 4.3 / 5.0 2B-B D0064.5500 NobelReplace® Narrow Platform (NP) Ø 3.5 2A-A D0064.5494 Regular Platform (RP) Ø 4.3 2A-B D0064.5495 Wide Platform (WP) Ø 5.0 2A-C D0064.5496 Ø 6.0 2A-D D0064.5497 Straumann® Tissue Level Regular Neck (RN) Ø 4.8 Wide Neck (WN) Ø 6.5 4B-A D0064.5501 Bone Level Narrow CrossFit® (NC) Ø 3.3 4A-A D0064.5503 Regular CrossFit® (RC) Ø 4.1 + Ø 4.8 4A-B D0064.5504 Zimmer® Dental Screw-Vent® Ø 3.5 Ø 4.5 5A-A D0064.5509 Ø 5.7 5A-B D0064.5511 ICX Ø 3.45 Ø 3.75 Ø 4.1 Ø 4.8 20A-A D0068.6417 Manufacturer Implant system Platform or implant [mm] Scanbody, labeling Scanbody, article number BioHorizons® Tapered Internal + Internal Ø 3.0 (not tissue level) without BZ2123.3000 (TP3SSB) Ø 3.5 without BZ2123.3500 (PYSSB) Ø 4.5 without BZ2123.4500 (PGSSB) Ø 5.7 (not Internal Plus) without BZ2123.5700 (PBSSB) Biomet® 3i OSSEOTITE® Ø 3.4 7A-A D0064.5487 Ø 4.1 Ø 5.0 / Ø 6.0 7A-B D0064.5488 OSSEOTITE® Certain® Ø 3.4 7B-A D0064.5483 Ø 4.1 Ø 5.0 / Ø 6.0 7B-B D0064.5484 Dentsply® Implants FRIALIT® + XiVE® Ø 3.4 8A-B D0066.7718 Ø 3.8 8A-C D0066.7719 Ø 4.5 / Ø 5.5 8A-D D0066.7720 Astra Tech OsseoSpeed® TX Ø 3.5 / Ø 4.0 3A-B D0064.5481 Ø 4.5 / Ø 5.0 3A-C D0064.5482 Note Names marked with ® are registered trademarks of their respective manufacturers (see page 93). BioHorizons®

16 DEDICAM Product Catalog 2019 SCANNING CAPS for scanning on prefabricated abutments Scanning caps for CAMLOG/ CONELOG bar abutments sterile, can be used without scan spray, incl. prosthetic screw Material: PEEK (poly ether ether ketone) Scanning caps for BioHorizons and Nobel Biocare® Multi-Unit abutments non-sterile, can be used without scan spray, incl. framed fixing screw Material: PEEK (poly ether ether ketone) Manufacturer Abutments Platform [mm] Scanning cap, labeling Scanning cap, article number CAMLOG CAMLOG + CONELOG bar abutments Ø 4.3 without J2610.4300 Ø 6.0 without J2610.6000 iSy implant/lab bases - without P2130.4004 Nobel Biocare® Multi-Unit abutments Narrow Platform (NP) Ø 3.5 2C-A D0064.5498 Regular Platform (RP) Ø 4.3 Wide Platform (WP) Ø 5.0 2C-B D0066.7717 iSy multifunctional caps for iSy implant/lab bases (3 pieces) sterile, can be used without scan spray, with snap-in function, 2 pieces included with each iSy Implant, cannot be used for double crowns, file-splitting and multi-unit structures Material: PEEK (poly ether ether ketone) The scan geometries of the scanning caps are part of the DEDICAM CAD libraries for bars and bridges occlusally screw-retained to abutments. The geometry of the iSy multifunctional cap is available for the design of abutments on single implants in the DEDICAM CAD libraries. BioHorizons® Multi-Unit abutments Ø 3.0 2C-A D0064.5498 Ø 3.5 Ø 4.5 Ø 5.7 iSy® Implant System CAMLOG® Implant System CONELOG® Implant System

17 DEDICAM Product Catalog 2019 Screwdriver only for scanbodies from other implant systems (not for BioHorizons) and scanning caps for BioHorizons and Nobel Biocare® Multi-Unit abutments Art. No.: D0066.6700 Material: steel (stainless) SCREWDRIVER for other implant systems

18 DEDICAM Product Catalog 2019 Titanium | Ti6Al4V One-piece abutments 11 One-piece gingiva formers 23 Bridges for titanium bases 41 Bars for titanium bases 45 Directly screw-retained bridges 49 Directly screw-retained bars 55 COMFOUR bridges 59 COMFOUR bridges, passive fit 61 Bridges and bars for multi-unit abutments 66 COMFOUR bars 69 COMFOUR bars, passive fit 71 Crowns and anatomical bridges 83 Frameworks for crowns and bridges 87 Double crowns 91

19 DEDICAM Product Catalog 2019 DEDICAM one-piece abutments are designed with the original DEDICAM one-piece CAD library in the suitable CAD software and the corresponding module. To this purpose, it is necessary to use the scanbodies suitable for the respective implant system (see page 15). The library allows construction with consideration of the material-specific properties. This adds to the safety and durability of the product. DEDICAM uses CE-compliant starting products from an audited and certified manufacturer for the one-piece titanium abutments of other implant systems. For your safety, this manufacturer was selected with the greatest care and this way we can ensure high precision of the implant-abutment connection. The supplied and also separately available abutment screws can be used with the implant manufacturer's original screwdriver. A horizontal thread drill hole M1.4 can be provided individually for screw-retained restorations. The thread is compatible with the "Bredent screw" (see page 13). IMPLANT PROSTHETICS One-piece abutments for other implant systems Material Titanium alloy (Ti6Al4V) Notes All DEDICAM one-piece abutments are supplied with an abutment screw. Names marked with ® are registered trademarks of their respective manufacturers. Construction as primary part of a double crown restoration is possible. Compatible with OSSEOTITE® precision milled or polished, incl. abutment screw with titanium nitrite coating Material: titanium alloy (Ti6Al4V), precision milled Material: titanium alloy (Ti6Al4V), polished (subgingival region) Biomet® 3i Diameters: 3.4 mm 4.1 mm 5.0 / 6.0 mm Abutment screw: M 2.0 Art. No. D0064.5658 Scanbody: Art. No. D0064.5487 Art. No. D0064.5488 BIOMET®, OSSEOTITE® and CERTAIN® are registered trademarks of Biomet 3i, LLC, U.S.A. Compatible with OSSEOTITE® Certain® precision milled or polished, incl. abutment screw with titanium nitrite coating Material: titanium alloy (Ti6Al4V), precision milled Material: titanium alloy (Ti6Al4V), polished (subgingival region) Biomet® 3i Diameters: 3.4 mm 4.1 mm 5.0 / 6.0 mm Abutment screw: M 1.6 Art. No. D0064.5657 Scanbody: Art. No. D0064.5483 Art. No. D0064.5484 BIOMET®, OSSEOTITE® and CERTAIN® are registered trademarks of Biomet 3i, LLC, U.S.A.

DEDICAM Product Catalog 2019 IMPLANT PROSTHETICS One-piece abutments for other implant systems 20 Compatible with Frialit® + XiVE® precision milled or polished, incl. abutment screw Material: titanium alloy (Ti6Al4V), precision milled Material: titanium alloy (Ti6Al4V), polished (subgingival region) Dentsply® Implants Diameters: 3.4 mm 3.8 mm 4.5 / 5.5 mm Abutment screw: M 1.6 Art. No. D0066.7551 Scanbody: Art. No. D0066.7718 Art. No. D0066.7719 Art. No. D0066.7720 FRIALIT® is a registered trademark of FRIATEC Aktiengesellschaft, Germany DENTSPLY®, OsseoSpeed® and XiVE® are registered trademarks of Dentsply IH AB, Sweden Compatible with Astra Tech OsseoSpeed® TX precision milled or polished, incl. abutment screw Material: titanium alloy (Ti6Al4V), precision milled Material: titanium alloy (Ti6Al4V), polished (subgingival region) Dentsply® Implants Diameters: 3.5 / 4.0 mm 4.5 / 5.0 mm Abutment screw: M 1.6 Art. No. D0064.5655 M 2.0 Art. No. D0064.5656 Scanbody: Art. No. D0064.5481 Art. No. D0064.5482 FRIALIT® is a registered trademark of FRIATEC Aktiengesellschaft, Germany DENTSPLY®, OsseoSpeed® and XiVE® are registered trademarks of Dentsply IH AB, Sweden Compatible with NobelReplace® precision milled or polished, incl. abutment screw with DLC coating (not M1.8) Material: titanium alloy (Ti6Al4V), precision milled Material: titanium alloy (Ti6Al4V), polished (subgingival region) Platform Ø: NP 3.5 mm RP 4.3 mm WP 5.0 mm 6.0 mm Abutment screw: M 1.8 Art. No. D0064.5662 M 2.0 Art. No. D0064.5663 Scanbody: Art. No. D0064.5494 Art. No. D0064.5495 Art. No. D0064.5496 Art. No. D0064.5497 NOBEL BIOCARE®, NobelActive®, NobelReplace® and BRÅNEMARK SYSTEM® are registered trademarks of NOBEL BIOCARE AB, Sweden Compatible with NobelActive® precision milled or polished, incl. abutment screw with DLC coating (not M1.6) Material: titanium alloy (Ti6Al4V), precision milled Material: titanium alloy (Ti6Al4V), polished (subgingival region) Nobel Biocare® Platform Ø: NP 3.5 mm RP 4.3/ 5.0 mm Abutment screw: M 1.6 Art. No. D0064.5664 M 2.0 Art. No. D0064.5665 Scanbody: Art. No. D0064.5499 Art. No. D0064.5500 NOBEL BIOCARE®, NobelActive®, NobelReplace® and BRÅNEMARK SYSTEM® are registered trademarks of NOBEL BIOCARE AB, Sweden Nobel Biocare®

21 DEDICAM Product Catalog 2019 Compatible with Screw-Vent® precision milled or polished, incl. abutment screw Material: titanium alloy (Ti6Al4V), precision milled Material: titanium alloy (Ti6Al4V), polished (subgingival region) Zimmer® Dental Diameters: 3.5 mm 4.5 mm 5.7 mm Abutment screw: M 1.8 Art. No. D0064.5668 Scanbody: Art. No. D0064.5509 Art. No. D0064.5511 ZIMMER® and SCREW-VENT® are registered trademarks of Zimmer Inc., U.S.A. Compatible with ICX implant system precision milled or polished, incl. abutment screw Material: titanium alloy (Ti6Al4V), precision milled Material: titanium alloy (Ti6Al4V), polished (subgingival region) Diameters: 3.45 mm 3.75 mm 4.1 mm 4.8 mm Abutment screw: M 1.6 Art. No. D0068.4860 Scanbody: Art. No. D0068.6417 medentis medical Compatible with Brånemark System® Mk III precision milled or polished, incl. abutment screw with DLC coating Material: titanium alloy (Ti6Al4V), precision milled Material: titanium alloy (Ti6Al4V), polished (subgingival region) Nobel Biocare® Platform Ø: NP 3.5 mm RP 4.1 mm WP 5.1 mm Abutment screw: M 1.6 Art. No. D0064.5659 M 2.0 Art. No. D0064.5660 M 2.5 Art. No. D0064.5661 Scanbody: Art. No. D0064.5491 Art. No. D0064.5492 Art. No. D0064.5493 NOBEL BIOCARE®, NobelActive®, NobelReplace® and BRÅNEMARK SYSTEM® are registered trademarks of NOBEL BIOCARE AB, Sweden Compatible with Tissue Level precision milled or polished, incl. abutment screw Material: titanium alloy (Ti6Al4V), precision milled Material: titanium alloy (Ti6Al4V), polished (subgingival region) Straumann® Platform Ø: RN 4.8 mm WN 6.5 mm Abutment screw: M 2.0 Art. No. D0064.5666 Scanbody: Art. No. D0064.5501 Straumann® is a registered trademark of Straumann Holding AG, Switzerland Compatible with Bone Level precision milled or polished, incl. abutment screw Material: titanium alloy (Ti6Al4V), precision milled Material: titanium alloy (Ti6Al4V), polished (subgingival region) Straumann® Platform Ø: NC 3.3 mm RC 4.1/4.8 mm Abutment screw: M 1.6 Art. No. D0064.5667 Scanbody: Art. No. D0064.5503 Art. No. D0064.5504 Straumann® is a registered trademark of Straumann Holding AG, Switzerland Note: a suitable screwdriver is available for all scanbodies of other implant systems (see page 17).

22 Sterilizable titanium alloy, can be used immediately after the surgical procedure The anatomical shape creates an optimal emergence profile Original connection for: CAMLOG implant system CONELOG implant system CERALOG Hexalobe implants iSy implant system BioHorizons Internal implants DEDICAM Product Catalog 2019 IPS e.max ZirCAD for CERALOG One-piece abutments 13 One-piece gingiva formers 25 Titanium | Ti6Al4V One-piece abutments 11 One-piece gingiva formers 23 Bridges for titanium bases 41 Bars for titanium bases 45 Directly screw-retained bridges 49 Directly screw-retained bars 55 COMFOUR bridges 59 COMFOUR bridges, passive fit 61 Bridges and bars for multi-unit abutments 66 COMFOUR bars 69 COMFOUR bars, passive fit 71 Crowns and anatomical bridges 83 Frameworks for crowns and bridges 87 Double crowns 91

23 DEDICAM Product Catalog 2019 DEDICAM one-piece gingiva formers are designed with the original DEDICAM CAD library for gingiva formers in the suitable CAD software and the corresponding abutment module. To do this it is necessary to use our scanbodies or iSy multifunctional caps respectively (see pages 14 -16). The screw channel is temporarily sealed with suitable materials. The one-piece gingiva former allows shaping of the soft tissue for transgingival healing or after exposure of the osseointegrated implants. This allows a natural emergence profile to be created. Complex soft tissue management may no longer be necessary. Customized gingiva formers can be designed without a model. To do this, the implant position is recorded with an intraoral scanner and a scanbody. The scanning data are loaded into suitable CAD software to design the gingiva formers there. IMPLANT PROSTHETIC One-piece gingiva formers for CAMLOG and BioHorizons implant systems Material Titanium alloy (Ti6Al4V) Zirconium oxide (only CERALOG gingiva formers) Note All DEDICAM one-piece gingiva formers are supplied with an abutment screw packaged non-sterile. CERALOG abutments with the titanium or gold screw selected in the CAD library or order portal. One-piece CAMLOG gingiva formers precision milled or polished, incl. abutment screw Diameters: 3.3 mm 3.8 mm 4.3 mm 5.0 mm 6.0 mm Material: titanium alloy (Ti6Al4V), precision milled Material: titanium alloy (Ti6Al4V), polished CAMLOG® Implant System precision milled polished One-piece CAMLOG PS gingiva formers* precision milled or polished, incl. abutment screw Diameters: – 3.8 mm 4.3 mm 5.0 mm 6.0 mm Material: titanium alloy (Ti6Al4V), precision milled Material: titanium alloy (Ti6Al4V), polished CAMLOG® Implant System precision milled polished PS: Platform Switching *The PS gingiva formers may only be used with CAMLOG implants with "K article numbers".

24 DEDICAM Product Catalog 2019 IMPLANT PROSTHETICS One-piece gingiva formers for CAMLOG and BioHorizons implant systems One-piece CONELOG gingiva formers precision milled or polished, incl. abutment screw Diameters: 3.3 mm 3.8 mm 4.3 mm 5.0 mm Material: titanium alloy (Ti6Al4V), precision milled One-piece iSy gingiva formers precision milled or polished, incl. abutment screw Diameters: | 3.8 mm | 4.4 mm | 5.0 mm | Material: titanium alloy (Ti6Al4V), precision milled Material: titanium alloy (Ti6Al4V), polished Material: titanium alloy (Ti6Al4V), polished CONELOG® Implant System iSy® Implant System precision milled polished precision milled polished One-piece BioHorizons gingiva formers for tapered internal and internal implants, precision milled or polished, without Laser-Lok, incl. abutment screw Material: titanium alloy (Ti6Al4V), precision milled Material: titanium alloy (Ti6Al4V), polished (subgingival region) BioHorizons®

25 DEDICAM Product Catalog 2019 One-piece CERALOG gingiva formers for CERALOG Hexalobe implants, polished, pure white (MO 0; corresponds to VITA shade guide BL1 to BL4) or stained (MO 1; corresponds to VITA shade guide A1/A2), abutment screw made of titanium or gold alloy must be selected via the CAD library or the ordering platform, and is supplied and charged separately. Unlike the assembled CERALOG PEKK gingiva formers, the gingiva formers made of zirconia rest - due to the material - exclusively on the horizontal surface of the shoulder of the CERALOG Hexalobe M implants. Material: IPS e.max ZirCAD for CERALOG (zirconium oxide, monochromatic) CERALOG® Implant System CERALOG abutment screws for the final screw-retention of one-piece CERALOG abutments and gingiva formers in the CERALOG Hexalobe implant Material: titanium alloy (Ti6Al4V) CERALOG® Implant System Material: Holisticor (gold alloy) MO 0 MO 1

26 DEDICAM Product Catalog 2019 Titanium | Ti6Al4V One-piece abutments 11 One-piece gingiva formers 23 Bridges for titanium bases 41 Bars for titanium bases 45 Directly screw-retained bridges 49 Directly screw-retained bars 55 COMFOUR bridges 59 COMFOUR bridges, passive fit 61 Bridges and bars for multi-unit abutments 66 COMFOUR bars 69 COMFOUR bars, passive fit 71 Crowns and anatomical bridges 83 Frameworks for crowns and bridges 87 Double crowns 91

27 DEDICAM Product Catalog 2019 IMPLANT PROSTHETICS One-piece gingiva formers for other implant systems Material Titanium alloy (Ti6Al4V) Notes All DEDICAM one-piece gingiva formers are supplied with an abutment screw packaged non-sterile. Names marked with ® are registered trademarks of their respective manufacturers. DEDICAM one-piece gingiva formers are designed with the original DEDICAM one-piece abutment CAD library in the suitable CAD software and the corresponding module for individual abutments. To this purpose, it is necessary to use the scanbodies suitable for the respective implant system (see page 15). The screw channel is sealed temporarily with suitable materials. DEDICAM uses CE-compliant starting products from an audited and certified manufacturer for the one-piece gingiva formers of other implant systems. For your safety, this manufacturer was selected with the greatest care and this way we can ensure high precision of the implant-abutment connection. The supplied and also separately available abutment screws can be used with the implant manufacturer's original screwdriver. Note: We recommend a minimum height of 1.0 mm above the screw head to assure secure fixation of the sealing material. Compatible with OSSEOTITE® precision milled or polished, incl. abutment screw with titanium nitrite coating Material: titanium alloy (Ti6Al4V), precision milled Material: titanium alloy (Ti6Al4V), polished Biomet® 3i Diameters: 3.4 mm 4.1 mm 5.0 / 6.0 mm Abutment screw: M 2.0 Art. No. D0064.5658 Scanbody: Art. No. D0064.5487 Art. No. D0064.5488 BIOMET®, OSSEOTITE® and CERTAIN® are registered trademarks of Biomet 3i, LLC, U.S.A. Compatible with OSSEOTITE® Certain® precision milled or polished, incl. abutment screw with titanium nitrite coating Material: titanium alloy (Ti6Al4V), precision milled Material: titanium alloy (Ti6Al4V), polished Biomet® 3i Diameters: 3.4 mm 4.1 mm 5.0 / 6.0 mm Abutment screw: M 1.6 Art. No. D0064.5657 Scanbody: Art. No. D0064.5483 Art. No. D0064.5484 BIOMET®, OSSEOTITE® and CERTAIN® are registered trademarks of Biomet 3i, LLC, U.S.A.

DEDICAM Product Catalog 2019 IMPLANT PROSTHETICS One-piece gingiva formers for other implant systems 28 Compatible with Frialit® + XiVE® precision milled or polished, incl. abutment screw Material: titanium alloy (Ti6Al4V), precision milled Material: titanium alloy (Ti6Al4V), polished Diameters: 3.4 mm 3.8 mm 4.5 / 5.5 mm Abutment screw: M 1.6 Art. No. D0066.7551 Scanbody: Art. No. D0066.7718 Art. No. D0066.7719 Art. No. D0066.7720 Dentsply® Implants FRIALIT® is a registered trademark of FRIATEC Aktiengesellschaft, Germany DENTSPLY®, OsseoSpeed® and XiVE® are registered trademarks of Dentsply IH AB, Sweden Compatible with Astra Tech OsseoSpeed® TX precision milled or polished, incl. abutment screw Material: titanium alloy (Ti6Al4V), precision milled Material: titanium alloy (Ti6Al4V), polished Dentsply® Implants Diameters: 3.5 / 4.0 mm 4.5 / 5.0 mm Abutment screw: M 1.6 Art. No. D0064.5655 M 2.0 Art. No. D0064.5656 Scanbody: Art. No. D0064.5481 Art. No. D0064.5482 DENTSPLY®, OsseoSpeed® and XiVE® are registered trademarks of Dentsply IH AB, Sweden Compatible with NobelReplace® precision milled or polished, incl. abutment screw with DLC coating (not M1.8) Material: titanium alloy (Ti6Al4V), precision milled Material: titanium alloy (Ti6Al4V), polished Nobel Biocare® Platform Ø: NP 3.5 mm RP 4.3 mm WP 5.0 mm 6.0 mm Abutment screw: M 1.8 Art. No. D0064.5662 M 2.0 Art. No. D0064.5663 Scanbody: Art. No. D0064.5494 Art. No. D0064.5495 Art. No. D0064.5496 Art. No. D0064.5497 NOBEL BIOCARE®, NobelActive®, NobelReplace® and BRÅNEMARK SYSTEM® are registered trademarks of NOBEL BIOCARE AB, Sweden Compatible with NobelActive® precision milled or polished, incl. abutment screw with DLC coating (not M1.6) Material: titanium alloy (Ti6Al4V), precision milled Material: titanium alloy (Ti6Al4V), polished Platform Ø: NP 3.5 mm RP 4.3 / 5.0 mm Abutment screw: M 1.6 Art. No. D0064.5664 M 2.0 Art. No. D0064.5665 Scanbody: Art. No. D0064.5499 Art. No. D0064.5500 Nobel Biocare® NOBEL BIOCARE®, NobelActive®, NobelReplace® and BRÅNEMARK SYSTEM® are registered trademarks of NOBEL BIOCARE AB, Sweden

29 DEDICAM Product Catalog 2019 Compatible with Tissue Level precision milled or polished, incl. abutment screw Material: titanium alloy (Ti6Al4V), precision milled Material: titanium alloy (Ti6Al4V), polished Platform Ø: RN 4.8 mm WN 6.5 mm Abutment screw: M 2.0 Art. No. D0064.5666 Scanbody: Art. No. D0064.5501 Straumann® Straumann® is a registered trademark of Straumann Holding AG, Switzerland Compatible with Bone Level precision milled or polished, incl. abutment screw Material: titanium alloy (Ti6Al4V), precision milled Material: titanium alloy (Ti6Al4V), polished Straumann® Platform Ø: NC 3.3 mm RC 4.1/4.8 mm Abutment screw: M 1.6 Art. No. D0064.5667 Scanbody: Art. No. D0064.5503 Art. No. D0064.5504 Straumann® is a registered trademark of Straumann Holding AG, Switzerland Compatible with Screw-Vent® precision milled or polished, incl. abutment screw Material: titanium alloy (Ti6Al4V), precision milled Material: titanium alloy (Ti6Al4V), polished Zimmer® Dental Platform Ø: 3.5 mm 4.5 mm 5.7 mm Abutment screw: M 1.8 Art. No. D0064.5668 Scanbody: Art. No. D0064.5509 Art. No. D0064.5511 ZIMMER® and SCREW-VENT® are registered trademarks of Zimmer Inc., U.S.A. Note: a suitable screwdriver is available for all scanbodies of other implant systems (see page 17). Compatible with ICX implant system precision milled or polished, incl. abutment screw Material: titanium alloy (Ti6Al4V), precision milled Material: titanium alloy (Ti6Al4V), polished medentis medical Diameters: 3.45 mm 3.75 mm 4.1 mm 4.8 mm Abutment screw: M 1.6 Art. No. D0068.4860 Scanbody: Art. No. D0068.6417 Compatible with Brånemark System® Mk III precision milled or polished, incl. abutment screw with DLC coating Material: titanium alloy (Ti6Al4V), precision milled Material: titanium alloy (Ti6Al4V), polished Nobel Biocare® Platform Ø: NP 3.5 mm RP 4.1 mm WP 5.1 mm Abutment screw: M 1.6 Art. No. D0064.5659 M 2.0 Art. No. D0064.5660 M 2.5 Art. No. D0064.5661 Scanbody: Art. No. D0064.5491 Art. No. D0064.5492 Art. No. D0064.5493 NOBEL BIOCARE®, NobelActive®, NobelReplace® and BRÅNEMARK SYSTEM® are registered trademarks of NOBEL BIOCARE AB, Sweden

DEDICAM Product Catalog 2019 30 IPS e.max ZirCAD Mesostructures for titanium bases 31 Crowns for titanium bases 35 Bridges for titanium bases 43 COMFOUR bridges, passive fit 63 Crowns and anatomical bridges 84 Frameworks for crowns and bridges 89 IPS e.max CAD Mesostructures for titanium bases 31 Crowns for titanium bases 36 Inlays, onlays and partial crowns 81 Veneers 82 Crowns and anatomical bridges 84 Crown framework 89 The mesostructures are available in two ceramic materials and several shades and grades of translucency for highest esthetical requirements The materials offer excellent compatibility with soft tissue The optimal placement of the cervical shoulder allows excellent esthetics and easy removal of the subgingival excess cement Rotation-locked titanium bases provide a durable connection between implant and individual abutment

31 DEDICAM Product Catalog 2019 IMPLANT PROSTHETICS Mesostructures for titanium bases for CAMLOG and BioHorizons implant systems DEDICAM mesostructures for the rotation-locked CAMLOG, CONELOG or iSy titanium bases CAD/CAM, crown or BioHorizons Internal hybrid titanium bases with hexagon allow the construction of two-piece abutments ("hybrid abutments"). They are available in two ceramic materials for the iSy implant base in IPS e.max ZirCAD. The mesostructure is designed with the original DEDICAM CAD library. This is executed in the suitable CAD software and the corresponding abutment module. The anatomical design of the individual shape of the mesostructure allows for a natural emergence profile. This lends optimal support to the soft tissue. The cervical shoulder can be prepared in an ideal manner and thus allows easy removal of subgingival excess cement. The abutment design is similar to a prepared tooth stump. This enables compensation of unfavorable implant positions/angulations. The ceramic materials in various shades and degrees of translucency can be used to achieve esthetics that meet the highest demands. The tooth-colored support of the soft tissue is advantageous in the anterior region or for thin types of gingiva. Mesostructures for other manufacturers' titanium bases can also be supplied (see page 38). Construction as primary part of a double crown restoration is only possible in IPS e.max ZirCAD. Material IPS e.max ZirCAD IPS e.max CAD Note The titanium base selected in the CAD library or in the ordering portal is included and charged separately. Mesostructures for rotation-locked titanium bases Titanium bases are included and charged separately CAMLOG implant system Ø: 3.3 mm 3.8 mm 4.3 mm 5.0 mm 6.0 mm CONELOG implant system Ø: 3.3 mm 3.8 mm 4.3 mm 5.0 mm iSy prosthetic platform Ø: | 4.5 mm | 5.2 mm | BioHorizons prosthetic platform Ø: 3.0 mm 3.5 mm 4.5 mm 5.7 mm Also available for iSy Implant bases Material: IPS e.max ZirCAD MO/LT (zirconium oxide, monochromatic) MO 0 MO 1 MO 2 MO 3 MO 4 LT BL LT A1 LT A2 LT A3 LT B1 LT B2 LT C2 LT D3 LT 0 LT 1 LT 2 LT 3 LT 4 Mesostructures for rotation-locked titanium bases Titanium bases are included and charged separately, supplied in metasilicate phase »blue crown«, crystallization firing required CAMLOG implant system Ø: 3.3 mm 3.8 mm 4.3 mm 5.0 mm 6.0 mm CONELOG implant system Ø: 3.3 mm 3.8 mm 4.3 mm 5.0 mm iSy prosthetic platform Ø: | 4.5 mm | 5.2 mm | BioHorizons prosthetic platform Ø: 3.0 mm 3.5 mm 4.5 mm 5.7 mm Material: IPS e.max CAD (lithium disilicate glass ceramic) MO = medium opacity Correlation to the VITA shade guide is given in the overview table (see page 100) MO 0 MO 1 MO 2 MO 3 MO 4 MO = medium opacity LT = low translucency BL = Bleach Correlation to the VITA shade guide is given in the overview table (see page 99)

32 DEDICAM Product Catalog 2019 Integrates inconspicuously into the oral environment Sterilizable Telio CAD Gingiva formers for titanium bases 33 Crowns for titanium bases, temporary 37 Bridges for titanium bases, bridge 43 COMFOUR bridges, passive fit 62 Crowns and anatomical bridges 85 Easy modification is possible

33 DEDICAM Product Catalog 2019 DEDICAM gingiva formers for rotation-locked CAMLOG, CONELOG or iSy titanium bases CAD/CAM, crown, iSy implant base or BioHorizons Internal hybrid titanium base with hexagon consist of tooth-colored PMMA plastic. The custom-made gingiva former is designed with the original DEDICAM CAD library. This is executed in the suitable CAD software and the corresponding abutment module. The anatomical shape of the gingiva formers allows the designing of a natural emergence profile and gives an esthetic overall result. The soft tissue is prepared perfectly for subsequent restoration. The custom-made abutment is bonded extraorally to the titanium base. The occlusal screw channel is sealed after integration. To optimize the emergence profile, gingiva formers for titanium bases are easily modified by applying suitable composite or grinding. Customized gingiva formers for titanium bases can be designed without a model. To do this, the implant position is recorded with an intraoral scanner and a scanbody. The scanning data are loaded into suitable CAD software to design the gingiva formers there. IMPLANT PROSTHETICS Gingiva formers for titanium bases for CAMLOG and BioHorizons implant systems Material Telio CAD (PMMA) Notes Wearing period maximum 12 months. Gingiva formers for other manufacturers' titanium bases can also be supplied (see page 39). The titanium base selected in the CAD library or in the ordering portal is included and charged separately. LT A1 LT A2 LT A3 LT A3.5 LT B1 LT BL3 LT = low translucency BL = Bleach Gingiva formers for rotation-locked titanium bases Titanium bases are included and charged separately CAMLOG implant system Ø: 3.3 mm 3.8 mm 4.3 mm 5.0 mm 6.0 mm CONELOG implant system Ø: 3.3 mm 3.8 mm 4.3 mm 5.0 mm iSy prosthetic platform Ø: | 4.5 mm | 5.2 mm | BioHorizons prosthetic platform Ø: 3.0 mm 3.5 mm 4.5 mm 5.7 mm Also available for iSy Implant bases Material: Telio CAD (PMMA)

DEDICAM Product Catalog 2019 34 Available in numerous tooth shades and three degrees of translucency Removal of excess cement is not necessary IPS e.max ZirCAD Mesostructures for titanium bases 31 Crowns for titanium bases 35 Bridges for titanium bases 43 COMFOUR bridges, passive fit 63 Crowns and anatomical bridges 84 Frameworks for crowns and bridges 89 IPS e.max CAD Mesostructures for titanium bases 31 Crowns for titanium bases 36 Inlays, onlays and partial crowns 81 Veneers 82 Crowns and anatomical bridges 84 Crown framework 89 Telio CAD Gingiva formers for titanium bases 33 Crowns for titaniumbases, temporary 37 Bridges for titanium bases, bridge 43 COMFOUR bridges, passive fit 62 Crowns and anatomical bridges 85

35 DEDICAM Product Catalog 2019 IMPLANT PROSTHETICS Crowns for titanium bases (suprastructure) for CAMLOG and BioHorizons implant systems DEDICAM crowns for rotation-locked CAMLOG, CONELOG or iSy titanium bases CAD/CAM, crown or BioHorizons Internal hybrid titanium base with hexagon are available in two ceramic materials, for the iSy implant base in IPS e.max ZirCAD. The anatomical suprastructure is designed with the original DEDICAM CAD library. This is executed in a suitable CAD software and the corresponding module. The anatomical shape of the crown for titanium bases allows for a natural emergence profile and gives an esthetic overall result. This lends optimal support to the soft tissue. The anatomical crown for rotation-locked titanium bases is bonded extraorally to the titanium base. The occlusal screw channel is sealed after integration. Crowns for titanium bases are particularly suited if the screw channel is located occlusally or palatal/lingual. Anatomical crowns for titanium bases allow cost-effective esthetic restorations. In addition, the removal of subgingival cement residues is unnecessary. Esthetics which meet the highest demands can be achieved with the tooth-colored ceramic materials IPS e.max ZirCAD and IPS e.max CAD. Both ceramics are available in three degrees of translucency. IPS e.max ZirCAD, the polychromatic version "MT Multi" with a natural shade gradient offers a large variety of individualization options. Material IPS e.max ZirCAD IPS e.max CAD Notes Crowns for other manufacturers' titanium bases can also be supplied (see page 39). The titanium base selected in the CAD library or in the ordering portal is included and charged separately. Crowns for rotation-locked titanium bases Titanium bases are included and charged separately CAMLOG implant system Ø: 3.3 mm 3.8 mm 4.3 mm 5.0 mm 6.0 mm CONELOG implant system Ø: 3.3 mm 3.8 mm 4.3 mm 5.0 mm iSy prosthetic platform Ø: | 4.5 mm | 5.2 mm | BioHorizons prosthetic platform Ø: 3.0 mm 3.5 mm 4.5 mm 5.7 mm Material: IPS e.max ZirCAD MT/LT (zirconium oxide, monochromatic) LT BL LT A1 LT A2 LT A3 LT B1 LT B2 LT C2 LT D3 LT 0 LT 1 LT 2 LT 3 LT 4 A1 A2 A3 B1 B C2 D MT = medium translucency LT = low translucency BL = Bleach Multi = medium translucency, with color gradient BL = Bleach Material: IPS e.max ZirCAD MT Multi (zirconium oxide, polychromatic) T A1 T A2 T A3 T B1 T B T C2 T D

36 DEDICAM Product Catalog 2019 Crowns for rotation-locked titanium bases Titanium bases are included and charged separately, supplied in metasilicate phase »blue crown«, crystallization firing required CAMLOG implant system Ø: 3.3 mm 3.8 mm 4.3 mm 5.0 mm 6.0 mm CONELOG implant system Ø: 3.3 mm 3.8 mm 4.3 mm 5.0 mm iSy prosthetic platform Ø: | 4.5 mm | 5.2 mm | BioHorizons prosthetic platform Ø: 3.0 mm 3.5 mm 4.5 mm 5.7 mm Material: IPS e.max CAD (lithium disilicate glass ceramic) LT = low translucency BL = Bleach LT A1 LT BL1 LT A2 LT BL2 LT A3 LT BL3 LT A3.5 LT BL4 LT A4 LT B1 LT B2 LT B3 LT B4 LT C1 LT C2 LT C3 LT C4 LT D2 LT D3 LT D4 IMPLANT PROSTHETICS Crowns for titanium bases (suprastructure) for CAMLOG and BioHorizons implant systems

37 DEDICAM Product Catalog 2019 IMPLANT PROSTHETICS Crowns for titanium bases, temporary (suprastructure) for CAMLOG and BioHorizons implant systems The anatomical shape of the temporary crown for rotation-locked CAMLOG, CONELOG or iSy titanium bases CAD/CAM, crown, iSy implant base or BioHorizons Internal hybrid titanium base with hexagon allows the design of a natural emergence profile and an esthetic overall result. The soft tissue is prepared perfectly for subsequent permanent restoration. The anatomical crown for titanium bases is bonded extraorally to the titanium base or iSy implant base. The occlusal screw channel is sealed after integration. To optimize the emergence profile, temporary crowns for titanium bases are easily modified by applying suitable composite or grinding. Anatomical temporary crowns for titanium bases allow cost-effective esthetic restorations during the transgingival healing phase or after exposure of the implants, up to a maximum wearing period of 12 months. The tooth-colored Telio CAD PMMA plastic integrates inconspicuously into the oral environment. Customized crowns for titanium bases can be designed without a model. To do this, the implant position is recorded with an intraoral scanner and a scanbody. The scanning data are loaded into a suitable CAD software to design the crowns there. Material Telio CAD Notes Wearing period maximum 12 months. Temporary crowns for other manufacturers' titanium bases can also be supplied (see page 39). The titanium base selected in the CAD library or in the ordering portal is included and charged separately. LT A1 LT A2 LT A3 LT A3.5 LT B1 LT BL3 LT = low translucency BL = Bleach Crowns for rotation-locked titanium bases, temporary Titanium bases are included and charged separately CAMLOG implant system Ø: 3.3 mm 3.8 mm 4.3 mm 5.0 mm 6.0 mm CONELOG implant system Ø: 3.3 mm 3.8 mm 4.3 mm 5.0 mm iSy prosthetic platform Ø: | 4.5 mm | 5.2 mm | BioHorizons prosthetic platform Ø: 3.0 mm 3.5 mm 4.5 mm 5.7 mm Also available for iSy Implant bases Material: Telio CAD (PMMA)

RkJQdWJsaXNoZXIy MTE0MzMw