23 DEDICAM Product Catalog 2019 DEDICAM one-piece gingiva formers are designed with the original DEDICAM CAD library for gingiva formers in the suitable CAD software and the corresponding abutment module. To do this it is necessary to use our scanbodies or iSy multifunctional caps respectively (see pages 14 -16). The screw channel is temporarily sealed with suitable materials. The one-piece gingiva former allows shaping of the soft tissue for transgingival healing or after exposure of the osseointegrated implants. This allows a natural emergence profile to be created. Complex soft tissue management may no longer be necessary. Customized gingiva formers can be designed without a model. To do this, the implant position is recorded with an intraoral scanner and a scanbody. The scanning data are loaded into suitable CAD software to design the gingiva formers there. IMPLANT PROSTHETIC One-piece gingiva formers for CAMLOG and BioHorizons implant systems Material Titanium alloy (Ti6Al4V) Zirconium oxide (only CERALOG gingiva formers) Note All DEDICAM one-piece gingiva formers are supplied with an abutment screw packaged non-sterile. CERALOG abutments with the titanium or gold screw selected in the CAD library or order portal. One-piece CAMLOG gingiva formers precision milled or polished, incl. abutment screw Diameters: 3.3 mm 3.8 mm 4.3 mm 5.0 mm 6.0 mm Material: titanium alloy (Ti6Al4V), precision milled Material: titanium alloy (Ti6Al4V), polished CAMLOG® Implant System precision milled polished One-piece CAMLOG PS gingiva formers* precision milled or polished, incl. abutment screw Diameters: – 3.8 mm 4.3 mm 5.0 mm 6.0 mm Material: titanium alloy (Ti6Al4V), precision milled Material: titanium alloy (Ti6Al4V), polished CAMLOG® Implant System precision milled polished PS: Platform Switching *The PS gingiva formers may only be used with CAMLOG implants with "K article numbers".