59 DEDICAM Product Catalog 2019 DEDICAM occlusally screw-retained bridges for CAMLOG and CONELOG bar abutments are fixed to the abutments with the prosthetic screws supplied. The bar abutments are selected according to the gingival height, the implant diameter and the possible implant axis divergences. In the COMFOUR® System, abutments with angles of 17° and 30° are available to compensate for implant axis divergences. The clinician can screw-retain the bar abutments in the implants and take impressions. This avoids irritation of the gingiva during try-in. Bridges on bar abutments are designed with the original DEDICAM CAD library for the COMFOUR system and the suitable CAD software with the corresponding module. Scanning is performed exclusively with the scanning caps for CAMLOG/CONELOG bar abutments (see page 16). The occlusally screw-retained bridge can easily be detatched from the bar abutments for inspection and care. The occlusally screw-retained bridges are available from 2 to 16 units. The span width of the bridge can be up to 30 mm. Appropriate connection cross sections are to be taken into consideration. The bridges can be combined onto CAMLOG and CONELOG bar abutments. Unfavorable implant positions/axis divergences can be compensated by angled bar abutments and the tapered contact surfaces between the bar abutment and the bridge. The bridge framework can be veneered with suitable ceramics or veneering plastics. Anatomical bridges or bridges that have been anatomically reduced and anatomically designed in combination are also available. A variety of attachments is available for the bridges (see page 88). COMFOUR® Occlusally screw-retained bridges for CAMLOG/CONELOG bar abutments Occlusally screw-retained bridges on bar abutments Prosthetic screws are included and charged separately, attachments are charged separately CAMLOG/CONELOG prosthetic platform Ø: | 4.3 mm | 6.0 mm | Material: titanium alloy (Ti6Al4V) Precision milled surface Material Titanium alloy (Ti6Al4V) CoCr alloy Note Prosthetic screws for the bar abutments selected in the CAD software or in the ordering portal are included and charged separately. Occlusally screw-retained bridges on bar abutments Prosthetic screws are included and charged separately, attachments are charged separately CAMLOG/CONELOG prosthetic platform Ø: | 4.3 mm | 6.0 mm | Material: cobalt chrome alloy Precision milled surface
RkJQdWJsaXNoZXIy MTE0MzMw