61 DEDICAM Product Catalog 2019 DEDICAM occlusally screw-retained bridges for CAMLOG and CONELOG bar abutments can be bonded passively to the titanium bonding bases for bar abutments directly in the mouth. This enables the incorporation of tension-free bridges using the tried and tested »Passive-Fit technique«. The bridges are fixed to the bar abutments with the bonded titanium bonding bases for bar abutments and the prosthetic screws. The bar abutments are selected according to the gingival height, the implant diameter and the possible implant axis divergences. In the COMFOUR system, abutments with angles of 17° and 30° are available for compensating implant axis divergences. The clinician can screw-retain the bar abutments in the implants and take impressions. This avoids irritation of the gingiva during try-in. Bridges for bar abutments are designed with the original DEDICAM CAD library for the COMFOUR system (bonding bar abutment) and the suitable CAD software with the corresponding module. Scanning is performed exclusively with the scanning caps for CAMLOG/ CONELOG bar abutments (see page 16). The occlusally screw-retained bridge can easily be detatched from the bar abutments for inspection and care. The occlusally screw-retained bridges are available from 2 to 16 units. The span width of the bridge can be up to 30 mm. Appropriate connection cross sections are to be taken into consideration. The bridges can be combined on CAMLOG and CONELOG bar abutments. Unfavorable implant positions/axis divergences can be compensated by angled bar abutments and the tapered contact surfaces between the bar abutment and the bridge. Anatomically reduced bridges can be veneered with suitable ceramics or veneering plastics prior to bonding on the titanium bonding bases. Bridges or bridges that have been anatomically reduced and anatomically designed in combination are also available. Various attachments are available for the titanium and CoCr alloy bridges (see page 88). COMFOUR Occlusally screw-retained bridges »Passive-Fit« for CAMLOG/CONELOG bar abutments Occlusally screw-retained bridges for bar abutments with "Passive-Fit” Prosthetic screws and titanium bonding bases for bar abutments are included and charged separately, attachments are charged separately CAMLOG/CONELOG prosthetic platform Ø: | 4.3 mm | 6.0 mm | Material: titanium alloy (Ti6Al4V) Precision milled surface Material Titanium alloy (Ti6Al4V) CoCr alloy IPS e.max ZirCAD Telio CAD Notes It is not necessary to send in the master cast. Prosthetic screws and titanium bonding bases for the platforms selected in the CAD software or in the ordering portal are included and charged separately.
RkJQdWJsaXNoZXIy MTE0MzMw