69 DEDICAM Product Catalog 2019 DEDICAM bars for CAMLOG and CONELOG bar abutments are fixed to the bar abutments with the prosthetic screws supplied. The bar abutments are selected according to the gingival height, the implant diameter and the possible implant axis divergences. In the COMFOUR system, abutments with angles of 17° and 30° are available for compensating implant axis divergences. The clinician can screw-retain the bar abutments in the implants and take impressions. This avoids irritation of the gingiva during try-in. Bars for bar abutments are designed with the original DEDICAM CAD library for the COMFOUR system and the suitable CAD software with the corresponding module. Scanning is performed exclusively with the scanning caps for CAMLOG/CONELOG bar abutments (see page 16). Unfavorable implant positions/axis divergences can be compensated by angled bar abutments and the tapered contact surfaces between the bar abutment and the bar. The bar can easily be detatched from the bar abutments for inspection and care. Our free tactile model measurement service guarantees the optimum fit of the bar onto the model. When you’re ready to send the master cast with removable, continuous gingival mask and undamaged implant analogs, please contact your local DEDICAM distributor. Bars for bar abutments are available starting from 2 implants. The span width between the implants can be up to 30 mm. The bars can be combined on CAMLOG and CONELOG bar abutments. Bars can be supplied with different bar profiles and various attachments (see pages 74 - 77). For bars on two implants it is recommended to use the Dolder bar profile, ovoid in straight connection and without extensions. This allows the prosthesis to rotate around the bar axis, thus avoiding leverage forces on the implant. COMFOUR Occlusally screw-retained bars for CAMLOG/CONELOG bar abutments Bars for bar abutments Prosthetic screws are included and charged separately, attachments are charged separately CAMLOG/CONELOG prosthetic platform Ø: | 4.3 mm | 6.0 mm | Material: cobalt chrome alloy precision milled polished Material Titanium alloy (Ti6Al4V) CoCr alloy The surface can be supplied precision milled or polished. Note Prosthetic screws for the bar abutments selected in the CAD software or in the ordering portal are included and charged separately. Bars for bar abutments Prosthetic screws are included and charged separately, attachments are charged separately CAMLOG/CONELOG prosthetic platform Ø: | 4.3 mm | 6.0 mm | Material: titanium alloy (Ti6Al4V) precision milled polished
RkJQdWJsaXNoZXIy MTE0MzMw