DEDICAM IMPLANT PROSTHETICS The prosthetic restoration of implants is one of CAMLOG's core competences. The declared goal is to achieve the best possible quality of results and to create the Optimum conditions for this. The DEDICAM CAD libraries are an elementary part for ensuring the fit of implant-prosthetic constructions. These are matched to the CAMLOG®, CONELOG®, iSy® and BioHorizons® Internal Implant Systems as well as other systems from leading manufacturers. With DEDICAM, CAMLOG provides you with custom-made products in CAMLOG quality. DEDICAM offers different solutions for the direct restoration of implants. Custom-made one-piece abutments made of titanium alloy (Ti6Al4V) are available, as are mesostructures made of ceramic materials, which you can combine to a two-piece abutment with a titanium base CAD/CAM. Anatomical crowns for titanium bases are an esthetic alternative in the case of suitable implant positioning. For this type of restoration one can choose between the IPS e.max CAD, IPS e.max ZirCAD materials as well as Telio CAD for temporary restorations. An individual gingiva former is a suitable solution for designing the emergence profile effectively as well as time and cost-saving. In the fully digital workflow, this gingiva former can also be used intraoperatively or after exposure of the healed implants to avoid elaborate soft tissue management if applicable. Primary splinting of several implants can be achieved with directly screw-retained implant bridges and bars. These are occlusally screw-retained directly on the implant shoulder. Divergences in implant angulations are compensated with the aid of modified implant connection geometries. Alternatively, bridges and bars can be screw-retained occlusally onto prefabricated bar abutments or multi-unit abutments. For the construction of occlusally screwretained bridges and bars on implant shoulders or abutments, the model is remeasured with high-precision scanners and the scan data combined with the CAD data, if you so wish. Consequently, possible inaccurarcies of the laboratory scanner can be compensated. Titanium bonding bases are available for CAMLOG and CONELOG bar abutments. Bridges and bars for these bonding bases are bonded in the mouth. This proven »Passive-Fit technique« ensures a tension-free fit of the construction and thus perfect precision. Indication-relevant implant bridges and bars are available made of CoCr, titanium alloy, IPS e.max ZirCAD and Telio CAD. The implant bridges can be veneered with suitable ceramics or plastics, depending on the material. The one-piece abutments, one-piece gingiva formers and directly screw-retained bridges and bars are supplied with abutment screws, CAMLOG and BioHorizons structures on titanium bases with the titanium bases and restorations on bar and multi-unit abutments with prosthetic screws and, if necessary, titanium bonding bases. The DEDICAM CAD libraries allow the design of implant-prosthetic restorations under consideration of material-specific properties. This adds to the safety and durability of the product. 8 DEDICAM Product Catalog 2019
RkJQdWJsaXNoZXIy MTE0MzMw