Valid from August 2020 Product catalog CAMLOG® Implant System
A | CAMLOG® Product catalog 2020
CAMLOG® Product catalog 2020 | 1 System information The CAMLOG® Implant System 2 Surgery Planning 16 PROGRESSIVE-LINE Implants and instruments 19 PROGRESSIVE-LINE Flex instruments 24 PROGRESSIVE-LINE Guide System 28 SCREW-LINE Implants and instruments 34 SCREW-LINE Guide System instruments 40 General surgical instruments 43 Osteotomy set 50 ALTApin set 54 Cover screws 57 Healing caps 57 Prosthetics Impression taking 60 Bite registration 61 Fabrication of the plaster model 61 Temporary restoration 62 Esthomic® Abutments 62 CAD/CAM prosthetics 64 CAM titanium blanks 66 Universal abutments 67 Gold-plastic abutment 67 Logfit® Prosthetic system 68 COMFOUR® System 69 Ball abutment anchoring system 73 Locator® Anchoring system 74 Double crown restorations 79 Accessories for abutments 79 Prosthetic instruments 80 Instruments for dental technicians 84 Selection abutments 85 Auxiliary article Implants for practice 88 Demonstration models 89 Macro models 89 Literature 90 Auxiliary information Indication overview 92 Implant overview 95 Prosthetics overview 96 Screw overview 102 Overview tightening torque 106 Materials 108 Index Alphabetical 110 Article number 114 Further documentation 125 Content
2 | CAMLOG® Product catalog 2020 The CAMLOG® Implant System is based on years of clinical and laboratory experience and is a user-friendly, consistent prosthetically oriented Implant system. All CAMLOG® Products are manufactured with the latest state-ofthe-art technology. The CAMLOG® Implant System is continuously being developed by the company’s research and development team in collaboration with clinics, universities and dental technicians and therefore stays abreast of the latest technology. The CAMLOG® and CONELOG® Implant Systems are very well documented scientifically. Studies* support this with respect to a great many parameters including the Implant surface, time of implantation and/or Implant loading, primary stability, and the connection design. The long-term results of the Promote® Surface are convincing. * see «Further documentation» on page 125 The CAMLOG® Implant System The descriptions that follow are not adequate to permit immediate use of the CAMLOG® Implant System. Instruction by a surgeon experienced in using the system is strongly recommended. CAMLOG® Products should only be used by dentists, doctors, surgeons and dental technicians who have been trained in using the system. Appropriate courses and training sessions are regularly offered by Camlog. Methodological errors in treatment can result in loss of the Implant and significant loss of peri-Implant bone. Not all products and services from Camlog are available in all countries. Packaging units: unless described otherwise, each pack contains one product. The images in this document are for reference purposes only and may differ from the actual product.
CAMLOG® Product catalog 2020 | 3 System information 0.4 mm PROMOTE® PLUS All CAMLOG® Implants are delivered pre-assembled in sterile packaging on a color-coded insertion post corresponding to the diameter. The option of Platform Switching may only be used with CAMLOG® Implants with K article numbers. CAMLOG® SCREW-LINE Implants CAMLOG® SCREW-LINE Implants are slightly conical, self-tapping screw Implants. They enable easy insertion by self-centering with continuous bone contact to achieve solid primary stability. SCREW-LINE Implants are available with both the Promote® Surface (1.4 mm machined Implant neck section) and the Promote® plus surface (0.4 mm machined Implant neck section) and thus allow maximum flexibility of the vertical Implant position. Rounding of the apical geometry ensures gentle insertion of the SCREW-LINE Implants into the bone, also near the maxillary sinus. SCREW-LINE Implants with screw-mounted insertion post can be used for the guided implantation. CAMLOG® SCREW-LINE Implants are equipped with the proven Tube-in-Tube® Implant-abutment connection and feature three symmetrically arranged angular grooves in the cylindrical part of the Implant neck. The prosthetic restoration is performed with CAMLOG® Abutments, optionally also with components for Platform Switching. Implant diameters CAMLOG® PROGRESSIVE-LINE Implants The new CAMLOG® PROGRESSIVE-LINE Implants make it easier to implement modern treatment concepts such as immediate restorations or immediate loading, which require high primary stability [1, 2]*. The geometry of the Implant is consistently designed to develop high initial stability: The self-tapping screw Implant has a conically shaped apical area that enables pronounced primary stability even in soft bone [1, 2]*. Thread extending to the apex for good anchorage in immediate implantations [1, 2]*. Crestal thread for improved hold with limited bone height [2]*. The CAMLOG® PROGRESSIVE-LINE Implants are available with the Promote® plus surface which features a 0.4 mm high machined Implant neck. Depending on the clinical situation, this surface design thus permits slightly supracrestal or epicrestal Implant positioning. PROGRESSIVE-LINE Implants with screw-mounted insertion post can be used for the guided implantation. CAMLOG® PROGRESSIVE-LINE Implants are equipped with the proven Tube-in-Tube® Implant- abutment connection and feature three symmetrically arranged angular grooves in the cylindrical part of the Implant neck. The prosthetic restoration is performed with CAMLOG® Abutments, optionally also with components for Platform Switching. * see «Further documentation» on page 125. Implant diameters Implant lengths 9 mm 11 mm 13 mm 16 mm Implant lengths 9 mm 11 mm 13 mm 16 mm 3.3 mm 3.8 mm 4.3 mm 5.0 mm 3.3 mm 3.8 mm 4.3 mm 5.0 mm 6.0 mm PROMOTE® PLUS 0.4 mm 1.4 mm PROMOTE®
4 | CAMLOG® Product catalog 2020 CAMLOG® Tube- in-Tube® Implant-abutment connection The unmistakable Tube-in-Tube principle with the three interlocking grooves and cams creates a very precise, stable, and antirotational implant-abutment connection. This was designed biomechanically on the basis of complex finite element analyses. It has proven itself millions of times over for many years and its long-term success has been scientifically documented. The CAMLOG® Tube-in-Tube® Connection has undergone extensive scientific studies and achieved above average good results for precision fit [3, 4]*. * see «Further documentation» on page 125. Abutment Abutment screw Groove/cam design Abutment guide in the Implant Upper inner thread Lower inner thread Implant Advantages and benefits of the Tube- in-Tube® Connection Easy indexing thanks to three possible positions of the abutments Precise with excellent tactile feedback Platform Matching and optional Platform Switching Defined vertical stop: no height offset over the entire workflow Reduced diameter implant (Ø 3.3 mm) Scientifically documented long-term results For optimal positioning of the abutments, the Implant should be aligned in the bone so that one of the three grooves points in vestibular direction. With the CAMLOG® Implants, the insertion tools include markings that correspond to the three grooves of the Implant inner configuration. Promote® Surface CAMLOG® Implants are available with the abrasive-blasted, acid-etched Promote® Surface. The surface is based on current scientific knowledge and supports rapid osseointegration. Scientific results from studies with cell cultures, osteohistology and in pull-out trials illustrate this impressively. Production precision The inner and outer geometry of the CAMLOG® Implants and abutments are rotary machined for the most part. The tolerances can therefore be kept very low. The result is excellent part precision without impacting the material structure. The Tube-in-Tube® Implant-abutment connection thus ensures a very precise, stable and rotation-locked connection to the prosthetic components.
CAMLOG® Product catalog 2020 | 5 System information CAMLOG® Prosthetic components The CAMLOG® Implants can be provided with a wide range of flexible, anatomically adapted prosthetic components. CAMLOG® Abutments are color-coded according to the Implant diameters. Effect of the Platform Switching design Platform Switching is used to support the hard and soft tissue in the peri-Implant esthetic region. The distance between the Implant-abutment interface and the alveolar crest is increased and thereby reduces the effect of inflammatory cell infiltration with concomitant bone resorption. The option of Platform Switching may only be used with CAMLOG® Implants with K article numbers. CAMLOG® Healing caps PS for Platform Switching The CAMLOG® Healing caps PS (cylindrical, wide body, bottleneck) are tapered in diameter at the shoulder support making it possible to adapt soft tissue over the Implant shoulder. CAMLOG® Temporary abutments PS, CAMLOG® Esthomic® Abutments PS, CAMLOG® Titanium base CAD/CAM PS and CAMLOG® Universal abutments PS for Platform Switching The CAMLOG® Abutments PS are also tapered in diameter in the area of the shoulder support and thus allow adapting soft tissue over the Implant shoulder during prosthetic restoration. CAMLOG® Impression posts PS, open and closed tray for Platform Switching Due to the adaptation of the soft tissue over the Implant shoulder, the use of the CAMLOG® Healing caps PS necessitates the use of the CAMLOG® Impression post PS for Platform Switching.
6 | CAMLOG® Product catalog 2020 CAMLOG® Abutments with K article numbers The abutments are extended apically in tubular shape (5.4 mm) and include three short cams in the upper section that correspond to the three grooves in the Implant. When inserting the abutments, their tubular extension towards the apex affects the simple, easy and safe orientation in the longitudinal axis of the Implant before the three cams lock into the grooves of the Implant shoulder. The abutment is rotated until tactile engagement of the cams in the grooves of the Implant. The abutment is then in the final position. The Implant-abutment connection of the CAMLOG® Implant System is predominantly a form-fitting connection. The connection with the cam geometry was optimally designed in terms of biomechanics by applying elaborate finite element analyses. The image displays the distribution of the von Mises tension in the Implant-abutment connection in accordance with ISO 14801 at a load of 200 N. Short cam geometry CAMLOG® Healing caps The various healing caps are used according to indication for single and two-stage procedures. The CAMLOG® Healing caps are available in three geometries (cylindrical, wide body and bottleneck), both for the standard connections as well as for the Platform Switching option (PS). They are not rotation-locked and are screw-retained in the upper inner thread of the Implants. CAMLOG® Impression taking Impression-taking of the CAMLOG® Implants is possible with impression posts, open or closed tray. Impression posts for Platform Switching (PS) are also an option. All impression-taking components are color-coded based on the Implant diameter. High-precision components ensure correct transfer of the intraoral situation. The antirotational mechanism is ensured by the CAMLOG® groove/cam geometry.
CAMLOG® Product catalog 2020 | 7 System information CAMLOG® Temporary abutments Various abutments are available for the CAMLOG® Implant System for temporary prosthetic restorations. CAMLOG® Temporary abutments made of titanium alloy (Ti6Al4V ELI) are available in crown and bridge versions. As an option, temporary restoration on CAMLOG® Implants can also be performed with temporary abutments made of PEEK (poly ether ether ketone). Also as option for Platform Switching (PS). The abutments can be used in immediate implantations or after exposing the gingiva. CAMLOG® Titanium bases CAD / CAM CAMLOG® Titanium bases CAD/CAM are acting as a bonding basis for customized, Implant-supported dental restorations made of suitable materials. Reconstructions are fabricated with the aid of CAD/CAM techniques. CAMLOG® Titanium bases CAD/CAM are available in crown and bridge versions. Optionally a Titanium base CAD/CAM crown PS is also available for Platform Switching. CAMLOG® Esthomic® Abutments Anatomically preformed abutments allow for optimal stump design. The CAMLOG® Esthomic® Abutments are available both straight and angled with various gingival heights and with an oval anatomically pre-shaped shoulder profile. The angled Esthomic® Abutments are available in A and B versions differentiated by a cam offset of 60°. This results in six prosthetic- oriented rotating positions and allows perfect prosthetic alignment of the axes. CAMLOG® Esthomic® Abutment cam alignment Type A Cam alignment against the angle Type B Cam alignment in direction of the angle Type A Type B Cams with 60° offset
8 | CAMLOG® Product catalog 2020 CAMLOG® Gold-plastic abutment The CAMLOG® Gold-plastic abutment can be used with the cast-on technique to fabricate a multitude of customized Implant restorations, such as single crowns, mesostructures for cementable bridge restorations and primary abutments for bridging Implant axis divergences in the double crown technique. CAMLOG® Logfit® Abutments The CAMLOG® Logfit® Prosthetic System enables the fabrication of cementable crown and bridge restorations. The Logfit® Prosthetic System consists of prefabricated components precisely matched to one another and thus standardizes the clinical and technical procedure. The result is a lower workload for the practice and the dental laboratory. CAMLOG® Universal and telescope abutments CAMLOG® Universal and telescope abutments can be used for individually fabricated cementable crown and bridge restorations and for double crown restorations. The universal abutment is also available for optional Platform Switching (PS). The abutments are made of titanium alloy and can be custom trimmed. CAMLOG® Ball, Locator® and straight bar abutments Ball, Locator® and straight bar abutments are available for the CAMLOG® Implant System. These differ from the abutments with abutment screws in the apical region through different connection designs. Ball, Locator® and straight bar abutments are manufactured as single pieces with a thread in the apical region which engages with the upper inner thread of the CAMLOG® Implant. These abutments are screwed into the CAMLOG® Implant using the corresponding insertion tools.
CAMLOG® Product catalog 2020 | 9 System information Angled bar abutment for the COMFOUR® System, available at angles of 17° and 30° Prosthetic screw for bar abutment Anatomically adapted emergence profile, slim design Titanium bonding base for all bar abutments, Passive-Fit COMFOUR® offers a large selection of options to manage the requirements of your practice. Easier and more time-saving. COMFOUR® System Occlusally screw-retained restorations are state-of-the-art. With the COMFOUR® System, edentulous patients are given the option of immediate, comfortable and permanent dentures based on four or six Implants as a rule – and thus a considerable gain in quality of life. But clinicians too can look forward to considerably greater comfort and freedom. COMFOUR® offers several treatment concepts. In addition to occlusally screw-retained crowns and bridges for immediate and delayed restorations, the multi-optional system also permits bar restorations on straight and angled bar abutments. COMFOUR® offers a wide range of options to master the challenges in practice routine easier and with less time in future. Next to its versatility, the COMFOUR® Prosthetic system excels through its slim design in particular. All components are of delicate and low design, which simplifies prosthetic restorations considerably for dentists and dental technicians. In addition, a number of technical highlights ensure that COMFOUR® is not simply just a name, but also a program – for users and patients alike.
10 | CAMLOG® Product catalog 2020 Digital service Individually CAD/CAM fabricated prosthetics, scanning and design services, 3D Implant planning, printed drilling templates and jaw models are available from Camlog through our DEDICAM® Service Division. Personal support with the accustomed competence of our employees as well as processes optimized right down to the finest detail ensure a high degree of certainty of results with the greatest possible individual freedom. Extensive libraries for the open CAD systems from 3Shape, exocad and Dental Wings are available for Implant-supported restorations. Discover your options and start your digital future with DEDICAM®. DEDICAM® Services are not available in all countries. Please ask your local Camlog representative for details.
CAMLOG® Product catalog 2020 | 11 System information Color coding of the surgical and prosthetic CAMLOG® Products 3.3 mm 3.8 mm 4.3 mm 5.0 mm 6.0 mm Explanation of symbols Explanation of abbreviations 00112233 0123 CE-label Consult instructions for use Caution, observe the warning notices MD Medical device Article number Lot number Sterilized using irradiation Single sterile barrier system with protective packaging outside Non-sterile Date of manufacture Use-by date Do not resterilize Do not reuse Do not use if package is damaged Keep away from sunlight Temperature limit Manufacturer MR-Conditional Rx only Caution: US Federal law restricts this device to sale by or on the order of a dentist or physician. Diameter A Apical diameter G Gingival diameter PP Prosthetic platform diameter L Length GH Gingival height PEEK Poly ether ether ketone POM Polyoxymethylene PS Platform Switching PPSU Polyphenylsulfone General safety instructions and warnings The descriptions in this product catalog are not sufficient to allow immediate use of the CAMLOG® Implant System. Instruction by a surgeon experienced in using the CAMLOG® Implant System is strongly recommended.
12 | CAMLOG® Product catalog 2020 Secondary packaging Sealed, folding box with color-coded product label Inner Implant packaging (primary packaging) Sealed, color-coded Example of product label for outer Implant packaging Packaging PROGRESSIVE-LINE Implants Diameter Lenght Implant/surface Data matrix code Article number Use-by date Lot number Date of manufacture QR code Web adress for instructions for use
CAMLOG® Product catalog 2020 | 13 System information Secondary packaging Sealed, folding box with color-coded product label Inner Implant packaging (primary packaging) Sealed, color-coded Example of product label for outer Implant packaging Packaging SCREW-LINE Implants Diameter Lenght Implant/surface Data matrix code Article number Use-by date Lot number Date of manufacture QR code Web adress for instructions for use
14 | CAMLOG® Product catalog 2020
Surgery CAMLOG® Product catalog 2020 | 15
16 | CAMLOG® Product catalog 2020 Article Art. No. ACTUAL SIZE 25% MAGNIFICATION IMPLANT DIAGNOSTIC GRID Diameter (mm) 3.3 mm x 11 mm 3.3 mm x 13 mm 3.3 mm x 16 mm 3.8 mm x 9 mm 3.8 mm x 11 mm 3.8 mm x 13 mm 3.8 mm x 16 mm 4.3 mm x 9 mm 4.3 mm x 11 mm 4.3 mm x 13 mm 4.3 mm x 16 mm 5.0 mm x 9 mm 5.0 mm x 11 mm 5.0 mm x 13 mm 5.0 mm x 16 mm 3.3 mm x 11 mm 3.3 mm x 13 mm 3.3 mm x 16 mm 3.8 mm x 9 mm 3.8 mm x 11 mm 3.8 mm x 13 mm 3.8 mm x 16 mm 4.3 mm x 9 mm 4.3 mm x 11 mm 4.3 mm x 13 mm 4.3 mm x 16 mm 5.0 mm x 9 mm 5.0 mm x 11 mm 5.0 mm x 13 mm 5.0 mm x 16 mm X-RAY PLANNING FOIL 1.25:1 CAMLOG® PROGRESSIVE-LINE IMPLANT, PROMOTE® PLUS CAMLOG® IMPLANT DIAGNOSTIC GRID Diameter (mm) IMPLANT DIAGNOSTIC GRID Diameter (mm) IMPLANT DIAGNOSTIC GRID Diameter (mm) IMPLANT DIAGNOSTIC GRID Diameter (mm) IMPLANT DIAGNOSTIC GRID Diameter (mm) IMPLANT DIAGNOSTIC GRID Diameter (mm) IMPLANT DIAGNOSTIC GRID Diameter (mm) mm 0.5 Apical drill excess length 13mm K5300.9014 Rev.00 03/2018 Manufacturer: ALTATEC GmbH Maybachstr. 5 71299 Wimsheim Germany Headquarters: CAMLOG Biotechnologies AG Margarethenstr. 38 4053 Basel, Switzerland info@camlog.com www.camlog.com +E219K530090141O +$0000079571O4 3.3 CORONAL 2.2 APICAL 2.2 APICAL 3.3 CORONAL L 9 3.8 CORONAL 3.0 APICAL L 11-16 3.8 CORONAL 2.7 APICAL L 9 4.3 CORONAL 3.0 APICAL L 11-16 4.3 CORONAL 2.7 APICAL L 9 5.0 CORONAL 3.5 APICAL L 11-16 5.0 CORONAL 3.2 APICAL L 9 3.8 CORONAL 3.0 APICAL L 11-16 3.8 CORONAL 2.7 APICAL L 9 4.3 CORONAL 3.0 APICAL L 9 5.0 CORONAL 3.5 APICAL L 11-16 5.0 CORONAL 3.2 APICAL L 11-16 4.3 CORONAL 2.7 APICAL X-Ray Planning foil 1.25:1 CAMLOG® PROGRESSIVE-LINE Implants Magnification 25% K5300.9014 - +E219K530090101K +$0010017460KX X-Ray Planning foil 1.25:1 CAMLOG® SCREW-LINE Implants Magnification 25% K5300.9010 - ACTUAL SIZE 40% MAGNIFICATION IMPLANT DIAGNOSTIC GRID Diameter (mm) 3.3 mm x 11 mm 3.3 mm x 13 mm 3.3 mm x 16 mm 3.8 mm x 9 mm 3.8 mm x 11 mm 3.8 mm x 13 mm 3.8 mm x 16 mm 4.3 mm x 9 mm 4.3 mm x 11 mm 4.3 mm x 13 mm 4.3 mm x 16 mm 5.0 mm x 9 mm 5.0 mm x 11 mm 5.0 mm x 13 mm 5.0 mm x 16 mm 3.3 mm x 11 mm 3.3 mm x 13 mm 3.3 mm x 16 mm 3.8 mm x 9 mm 3.8 mm x 11 mm 3.8 mm x 13 mm 3.8 mm x 16 mm 4.3 mm x 9 mm 4.3 mm x 11 mm 4.3 mm x 13 mm 4.3 mm x 16 mm 5.0 mm x 9 mm 5.0 mm x 11 mm 5.0 mm x 13 mm 5.0 mm x 16 mm X-RAY PLANNING FOIL 1.4:1 CAMLOG® PROGRESSIVE-LINE IMPLANT, PROMOTE® PLUS CAMLOG® IMPLANT DIAGNOSTIC GRID Diameter (mm) IMPLANT DIAGNOSTIC GRID Diameter (mm) IMPLANT DIAGNOSTIC GRID Diameter (mm) IMPLANT DIAGNOSTIC GRID Diameter (mm) IMPLANT DIAGNOSTIC GRID Diameter (mm) IMPLANT DIAGNOSTIC GRID Diameter (mm) IMPLANT DIAGNOSTIC GRID Diameter (mm) mm 0.5 Apical drill excess length 13mm K5300.9015 Rev.00 03/2018 Manufacturer: ALTATEC GmbH Maybachstr. 5 71299 Wimsheim Germany Headquarters: CAMLOG Biotechnologies AG Margarethenstr. 38 4053 Basel, Switzerland info@camlog.com www.camlog.com +E219K530090151P +$0000079572P6 3.3 CORONAL 2.2 APICAL 2.2 APICAL 3.3 CORONAL L 9 3.8 CORONAL 3.0 APICAL L 11-16 3.8 CORONAL 2.7 APICAL L 9 4.3 CORONAL 3.0 APICAL L 11-16 4.3 CORONAL 2.7 APICAL L 9 5.0 CORONAL 3.5 APICAL L 11-16 5.0 CORONAL 3.2 APICAL L 9 3.8 CORONAL 3.0 APICAL L 11-16 3.8 CORONAL 2.7 APICAL L 9 4.3 CORONAL 3.0 APICAL L 9 5.0 CORONAL 3.5 APICAL L 11-16 5.0 CORONAL 3.2 APICAL L 11-16 4.3 CORONAL 2.7 APICAL X-Ray Planning foil 1.4:1 CAMLOG® PROGRESSIVE-LINE Implants Magnification 40% K5300.9015 - +E219K530090111L +$0010017461LZ X-Ray Planning foil 1.4:1 CAMLOG® SCREW-LINE Implants Magnification 40% K5300.9011 - +E219K530090801R +$0010017462R% X-Ray Transfer pictures 1.25:1 CAMLOG® SCREW-LINE Implants Planning foils, self-adhesive Magnification 25% K5300.9080 3.3 mm K5300.9081 3.8 mm K5300.9082 4.3 mm K5300.9083 5.0 mm K5300.9084 6.0 mm Planning X-Ray Planning foils and X-Ray Transfer pictures
Surgery CAMLOG® Product catalog 2020 | 17 * for pilot drills J5051.2003 and pilot drills SCREW-LINE J5051.2000 CT-Planning For 3-D X-Ray Planning and drilling template Article Art. No. L CT-tube for drill Ø 2.0 mm*, corrugated tubing pack of 10 internal diameter 2.1 mm external diameter 2.5 mm Material Titanium alloy A2002.2000 4.0 mm 10.0 mm v CT-tube for drill Ø 2.2 mm, corrugated tubing pack of 10 internal diameter 2.3 mm external diameter 2.7 mm Material Titanium alloy A2222.2200 4.0 mm 10.0 mm Drill for CT-tube (for A2002.2000) Ø 2.6 mm Material Stainless steel A2050.2600 - v Drill for CT-tube (for A2222.2200) Ø 2.8 mm Material Stainless steel A2050.2800 -
18 | CAMLOG® Product catalog 2020
Surgery CAMLOG® Product catalog 2020 | 19 Article Art. No. L A CAMLOG® PROGRESSIVE-LINE Implant, Promote® plus incl. snap-in insertion post and cover screw, sterile Material Titanium Grade 4 K1076.3311 3.3 mm 11 mm 2.2 mm K1076.3313 13 mm K1076.3316 16 mm K1076.3809 3.8 mm 9 mm 3.0 mm K1076.3811 11 mm 2.7 mm K1076.3813 13 mm K1076.3816 16 mm K1076.4309 4.3 mm 9 mm 3.0 mm K1076.4311 11 mm 2.7 mm K1076.4313 13 mm K1076.4316 16 mm K1076.5009 5.0 mm 9 mm 3.5 mm K1076.5011 11 mm 3.2 mm K1076.5013 13 mm K1076.5016 16 mm With CAMLOG® PROGRESSIVE-LINE Implants with the diameters 3.8/4.3/5.0 mm, the option of Platform Switching is possible. PROGRESSIVE-LINE Implants with snap-in insertion post 0.4 mm L A Article Art. No. L A CAMLOG® PROGRESSIVE-LINE Implant, Promote® plus incl. screw-mounted insertion post and cover screw, sterile Material Titanium Grade 4 K1075.3311 3.3 mm 11 mm 2.2 mm K1075.3313 13 mm K1075.3316 16 mm K1075.3809 3.8 mm 9 mm 3.0 mm K1075.3811 11 mm 2.7 mm K1075.3813 13 mm K1075.3816 16 mm K1075.4309 4.3 mm 9 mm 3.0 mm K1075.4311 11 mm 2.7 mm K1075.4313 13 mm K1075.4316 16 mm K1075.5009 5.0 mm 9 mm 3.5 mm K1075.5011 11 mm 3.2 mm K1075.5013 13 mm K1075.5016 16 mm 0.4 mm L A Implants with screw-mounted insertion post HINWEIS CAMLOG® PROGRESSIVE-LINE Implantate mit verschraubtem Einbringpfosten sind ab September 2019 erhältlich.
20 | CAMLOG® Product catalog 2020 * These articles are not included in the surgery set and must be ordered separately. PROGRESSIVE-LINE Surgery set CAMLOG®/ CONELOG® J5070.3309 J5070.3311 J5070.3313 J5070.3316 J5070.3809 J5070.3811 J5070.3813 J5070.3816 J5015.3300 J5015.4300 J5070.3807 J5070.5007 J5070.4307 J5050.2300 J5051.2000 J5317.0502 J5317.0501 J5317.0503 J5072.3300 J5072.3800 J5072.4300 J5015.3800 J5015.3800 J5015.5000 J5300.0036 J5300.0032 J5300.0033 J5300.0037 J5002.0011 J5002.0006 J5300.0031 J5300.0022 * *
Surgery CAMLOG® Product catalog 2020 | 21 J5300.2000 J5070.4309 J5070.4311 J5070.4313 J5070.4316 J5070.5009 J5070.5011 J5070.5013 J5070.5016 J5015.4300 J5015.0009 J5015.0011 J5015.0013 J5072.5000 J5071.3300 J5071.3800 J5071.4300 J5071.5000 J5302.0010 J5320.1030 J5015.0007 J5015.5000 * * * * The drills are arranged and sorted in the set according to the treatment sequence. Color lines indicate the exact drilling sequence. J5300.2000 J5070.4309 J5070.4311 J5070.4313 J5070.4316 J5070.5009 J5070.5011 J5070.5013 J5070.5016 J5015.4300 J5015.0009 J5015.0011 J5015.0013 J5072.4300 J5072.5000 J5071.330 J5071.38 0 J5071.43 0 J5071.5000 J5302.0010 J5320.1030 J5015.0007 J5015.5000 * * * *
22 | CAMLOG® Product catalog 2020 PROGRESSIVE-LINE Surgery set Preparation of the Implant bed for CAMLOG® PROGRESSIVE-LINE Implants and for CONELOG® PROGRESSIVE-LINE Implants is performed with identical instruments. Article Art. No. Surgery set CAMLOG®/CONELOG® PROGRESSIVE-LINE contains all necessary surgical instruments sorted by color code, incl. torque wrench and holding key for insertion post (taps are not included) J5300.0065 Surgery tray CAMLOG®/CONELOG® PROGRESSIVE-LINE without content J5300.8917 Surgery wash tray CAMLOG®/CONELOG® PROGRESSIVE-LINE incl. pattern, without content J5300.8970 Pattern for surgery wash tray CAMLOG®/CONELOG® PROGRESSIVE-LINE Material PPSU J5300.1070
Surgery CAMLOG® Product catalog 2020 | 23 Surgical instruments Article Art. No. L Form drill PROGRESSIVE-LINE resterilizable Material Stainless steel J5070.3309 3.3 mm 9 mm J5070.3311 11 mm J5070.3313 13 mm J5070.3316 16 mm J5070.3809 3.8 mm 9 mm J5070.3811 11 mm J5070.3813 13 mm J5070.3816 16 mm J5070.4309 4.3 mm 9 mm J5070.4311 11 mm J5070.4313 13 mm J5070.4316 16 mm J5070.5009 5.0 mm 9 mm J5070.5011 11 mm J5070.5013 13 mm J5070.5016 16 mm Depth stop for form drills PROGRESSIVE-LINE and SCREW-LINE resterilizable Material Titanium alloy J5015.3300 3.3 mm - J5015.3800 3.8 mm J5015.4300 4.3 mm J5015.5000 5.0 mm Dense bone drill PROGRESSIVE-LINE resterilizable Material Stainless steel J5072.3300 3.3 mm - J5072.3800 3.8 mm J5072.4300 4.3 mm J5072.5000 5.0 mm Tap PROGRESSIVE-LINE resterilizable Material Stainless steel J5071.3300 3.3 mm - J5071.3800 3.8 mm J5071.4300 4.3 mm J5071.5000 5.0 mm Removal adapter for CAMLOG® and CONELOG® suitable for all Implant diameters Material Stainless steel J5300.0022* 3.3 mm 6.2 mm 3.8 mm 4.3 mm 5.0 mm Paralleling pin PROGRESSIVE-LINE with depth marks (for pilot drilling Ø 2.0 mm) Material Titanium alloy J5300.2000 - - * only for use with PROGRESSIVE-LINE Implants with snap-in insertion post
24 | CAMLOG® Product catalog 2020 J5080.3300 J5080.3800 J5080.4300 J5080.5000 J5300.0022 J5317.0501 J5002.0013 J5300.0033 * Optional articles, can be purchased separately J5079.3300 J5079.3800 J5050.2300 J5051.2000 NEW PROGRESSIVE-LINE Flex Surgery set CAMLOG®/CONELOG®
Surgery CAMLOG® Product catalog 2020 | 25 J5072.3300 J5072.3800 J5072.4300 J5072.5000 J5317.0504 J5320.1030 J5302.0010 J5002.0006 J5079.4300 J5079.5000 J5300.0036 J5300.2000 The drills are arranged and sorted in the set according to the treatment sequence. Color lines indicate the exact drilling sequence.
26 | CAMLOG® Product catalog 2020 PROGRESSIVE-LINE Flex Surgery set Article Art. No. Surgery set CAMLOG®/CONELOG® PROGRESSIVE-LINE Flex contains all necessary surgical instruments sorted by color code, incl. torque wrench and holding key for insertion post J5300.0071 Surgery tray CAMLOG®/CONELOG® PROGRESSIVE-LINE Flex without content J5300.8920
Surgery CAMLOG® Product catalog 2020 | 27 Surgical instruments Article Art. No. L Drill PROGRESSIVE-LINE Flex resterilizable Material Stainless steel J5079.3300 3.3 mm - J5079.3800 3.8 mm J5079.4300 4.3 mm J5079.5000 5.0 mm Profile drill PROGRESSIVE-LINE Flex resterilizable Material Stainless steel J5080.3300 3.3 mm - J5080.3800 3.8 mm J5080.4300 4.3 mm J5080.5000 5.0 mm Wrench adapter Material Stainless steel J5002.0013 - 11 mm Preparation of the Implant bed with PROGRESSIVE-LINE Flex instruments is also identical for CAMLOG® and CONELOG® PROGRESSIVE-LINE Implants.
28 | CAMLOG® Product catalog 2020 PROGRESSIVE-LINE Guide System Surgery set CAMLOG®/ CONELOG® J5074.3305 J5074.3309 J5074.3311 J5074.3313 J5074.3316 J5076.3305 J5076.3309 J5076.3311 J5076.3313 J5076.3316 J5074.5005 J5074.5007 J5074.5009 J5074.5011 J5074.5013 J5074.5016 J5074.4305 J5074.4307 J5074.4309 J5074.4311 J5074.4313 J5074.4316 J5041.3304 J5041.3804 J5041.4304 J5041.5004 J5300.0031 J5317.0501 J5317.0503 J5317.0502 J5300.0033 J5300.0032 J5300.0037 J5300.0036 NEW
Surgery CAMLOG® Product catalog 2020 | 29 J5078.3309 J5078.3311 J5078.3313 J5078.3316 J5078.4307 J5078.4309 J5078.4311 J5078.4313 J5078.4316 J5078.3807 J5078.3809 J5078.3811 J5078.3813 J5078.3816 J5078.5007 J5078.5009 J5078.5011 J5078.5013 J5078.5016 J5076.4305 J5076.4307 J5076.4309 J5076.4311 J5076.4313 J5076.4316 J5076.5005 J5076.5007 J5076.5009 J5076.5011 J5076.5013 J5076.5016 J5077.3309 J5077.3311 J5077.3313 J5077.3316 J5302.0010 J5320.1030 J5076.3805 J5076.3807 J5076.3809 J5076.3811 J5076.3813 J5076.3816 The drills are arranged and sorted in the set according to the treatment sequence. Color lines indicate the exact drilling sequence. J5300.2000 J5070.4309 J5070.4311 J5070.4313 J5070.4316 J5070.5009 J5070.5011 J5070.5013 J5070.5016 J5015.4300 J5015.0009 J5015.0011 J5015.0013 J5072.4300 J5072.5000 J5071.3300 J5071.3800 J5071.4300 J5071.5000 J5302.0010 J5320.1030 J5015.0007 J5015.5000 * * * *
30 | CAMLOG® Product catalog 2020 PROGRESSIVE-LINE Guide System Article Art. No. Guide System surgery tray CAMLOG®/CONELOG® PROGRESSIVE-LINE without content J5300.8919 Notes CAMLOG® PROGRESSIVE-LINE Implants with Art. No. K1075.xxxx with screw-mounted insertion post can be used with the PROGRESSIVE-LINE Guide System. Article Art. No. L Guide System gingiva punch PROGRESSIVE-LINE resterilizable Material Stainless steel J5041.3304 3.3 mm - J5041.3804 3.8 mm J5041.4304 4.3 mm J5041.5004* 5.0 mm Guide System pilot drill PROGRESSIVE-LINE resterilizable Material Stainless steel J5074.3305 3.3 mm 5 mm J5074.3309 9 mm J5074.3311 11 mm J5074.3313 13 mm J5074.3316 16 mm J5074.4305 3.8 mm 4.3 mm 5 mm J5074.4307 7 mm J5074.4309 9 mm J5074.4311 11 mm J5074.4313 13 mm J5074.4316 16 mm J5074.5005* 5.0 mm 5 mm J5074.5007* 7 mm J5074.5009* 9 mm J5074.5011* 11 mm J5074.5013* 13 mm J5074.5016* 16 mm * product availability expected for end of Q1/2021
Surgery CAMLOG® Product catalog 2020 | 31 Article Art. No. L Guide System pre-drill PROGRESSIVE-LINE resterilizable Material Stainless steel J5076.3305 3.3 mm 5 mm J5076.3805 3.8 mm J5076.4305 4.3 mm J5076.5005* 5.0 mm Guide System form drill PROGRESSIVE-LINE resterilizable Material Stainless steel J5076.3311 3.3 mm 11 mm J5076.3313 13 mm J5076.3316 16 mm J5076.3809 3.8 mm 9 mm J5076.3811 11 mm J5076.3813 13 mm J5076.3816 16 mm J5076.4309 4.3 mm 9 mm J5076.4311 11 mm J5076.4313 13 mm J5076.4316 16 mm J5076.5009* 5.0 mm 9 mm J5076.5011* 11 mm J5076.5013* 13 mm J5076.5016* 16 mm Guide System dense bone drill PROGRESSIVE-LINE resterilizable Material Stainless steel J5078.3311 3.3 mm 11 mm J5078.3313 13 mm J5078.3316 16 mm J5078.3809 3.8 mm 9 mm J5078.3811 11 mm J5078.3813 13 mm J5078.3816 16 mm J5078.4309 4.3 mm 9 mm J5078.4311 11 mm J5078.4313 13 mm J5078.4316 16 mm J5078.5009* 5.0 mm 9 mm J5078.5011* 11 mm J5078.5013* 13 mm J5078.5016* 16 mm Guide System form drill for Ø 3.8 mm under preparation PROGRESSIVE-LINE resterilizable Material Stainless steel J5077.3309 3.3 mm 9 mm J5077.3311 11 mm J5077.3313 13 mm J5077.3316 16 mm * product availability expected for end of Q1/2021
32 | CAMLOG® Product catalog 2020 PROGRESSIVE-LINE Guide System Article Art. No. L Guide System template drill PROGRESSIVE-LINE for Guide System guiding sleeve Material Stainless steel J3753.3300 3.3 mm - J3753.4300 3.8 mm 4.3 mm J3753.5000* 5.0 mm Guide System guiding sleeve PROGRESSIVE-LINE** (2 units) Material Titanium alloy J3754.3301 3.3 mm - J3754.3801 3.8 mm J3754.4301 4.3 mm J3754.5001* 5.0 mm Guide System setting tool PROGRESSIVE-LINE for Guide System guiding sleeve Material Stainless steel J3717.3300 3.3 mm - J3717.4300 3.8 mm 4.3 mm J3717.5000* 5.0 mm Guide System check-up pin PROGRESSIVE-LINE for Guide System guiding sleeve Material Stainless steel J5301.3310 3.3 mm - J5301.4310 3.8 mm 4.3 mm J5301.5010* 5.0 mm Guide System CAMLOG® Insertion post, screw-mounted for CAMLOG® Lab implant/implant analog, incl. fixing screw (2 units) Material Titanium alloy K2026.3303 3.3 mm - K2026.3803 3.8 mm K2026.4303 4.3 mm K2026.5003* 5.0 mm * product availability expected for end of Q1/2021 ** only for use with PROGRESSIVE-LINE Implants with screw-mounted insertion post
Surgery CAMLOG® Product catalog 2020 | 33
34 | CAMLOG® Product catalog 2020 SCREW-LINE Implants with snap-in insertion post Article Art. No. L A CAMLOG® SCREW-LINE Implant, Promote® incl. snap-in insertion post and cover screw, sterile Material Titanium Grade 4 K1046.3311* 3.3 mm 11 mm 2.7 mm K1046.3313* 13 mm K1046.3316* 16 mm K1046.3809* 3.8 mm 9 mm 3.5 mm K1046.3811* 11 mm K1046.3813* 13 mm K1046.3816* 16 mm K1046.4309* 4.3 mm 9 mm 3.9 mm K1046.4311* 11 mm K1046.4313* 13 mm K1046.4316* 16 mm K1046.5009* 5.0 mm 9 mm 4.6 mm K1046.5011* 11 mm K1046.5013* 13 mm K1046.5016* 16 mm K1046.6009* 6.0 mm 9 mm 5.5 mm K1046.6011* 11 mm K1046.6013* 13 mm K1046.6016* 16 mm CAMLOG® SCREW-LINE Implant, Promote® plus incl. snap-in insertion post and cover screw, sterile Material Titanium Grade 4 K1056.3311** 3.3 mm 11 mm 2.7 mm K1056.3313** 13 mm K1056.3316** 16 mm K1056.3809** 3.8 mm 9 mm 3.5 mm K1056.3811** 11 mm K1056.3813** 13 mm K1056.3816** 16 mm K1056.4309** 4.3 mm 9 mm 3.9 mm K1056.4311** 11 mm K1056.4313** 13 mm K1056.4316** 16 mm K1056.5009** 5.0 mm 9 mm 4.6 mm K1056.5011** 11 mm K1056.5013** 13 mm K1056.5016** 16 mm K1056.6009** 6.0 mm 9 mm 5.5 mm K1056.6011** 11 mm K1056.6013** 13 mm K1056.6016** 16 mm With CAMLOG® SCREW-LINE Implants with the diameters 3.8/4.3/5.0/6.0 mm, the option of Platform Switching is possible. Notes CAMLOG® SCREW-LINE Implants Promote® with Art. No. K1044.xxxx/K1045.xxxx/K1046.xxxx and CAMLOG® SCREW-LINE Implants Promote® plus with Art. No. K1054.xxxx/K1055.xxxx/K1056.xxxx can be used exclusively with the drivers Art. No. J5300.0031, J5300.0032, J5300.0033, J5300.0034, J5300.0035, J5300.0036 or J5300.0037. 1.4 mm L A 0.4 mm L A * P lease note: CAMLOG® SCREW-LINE Implants Promote® with Art. No. K1046.xxxx succeed Implants with Art. No. K1044.xxxx. Depending on your country CAMLOG® SCREW-LINE Implants Promote® with Art. No. K1044.xxxx might still be available for a longer period. ** P lease note: CAMLOG® SCREW-LINE Implants Promote® plus with Art. No. K1056.xxxx succeed Implants with Art. No. K1054.xxxx. Depending on your country CAMLOG® SCREW-LINE Implants Promote® plus with Art. No. K1054.xxxx might still be available for a longer period.
Surgery CAMLOG® Product catalog 2020 | 35 Article Art. No. L A CAMLOG® SCREW-LINE Implant, Promote® incl. screw-mounted insertion post and cover screw, sterile Material Titanium Grade 4 K1045.3311 3.3 mm 11 mm 2.7 mm K1045.3313 13 mm K1045.3316 16 mm K1045.3809 3.8 mm 9 mm 3.5 mm K1045.3811 11 mm K1045.3813 13 mm K1045.3816 16 mm K1045.4309 4.3 mm 9 mm 3.9 mm K1045.4311 11 mm K1045.4313 13 mm K1045.4316 16 mm K1045.5009 5.0 mm 9 mm 4.6 mm K1045.5011 11 mm K1045.5013 13 mm CAMLOG® SCREW-LINE Implant, Promote® plus incl. screw-mounted insertion post and cover screw, sterile Material Titanium Grade 4 K1055.3311* 3.3 mm 11 mm 2.7 mm K1055.3313* 13 mm K1055.3316* 16 mm K1055.3809* 3.8 mm 9 mm 3.5 mm K1055.3811* 11 mm K1055.3813* 13 mm K1055.3816* 16 mm K1055.4309* 4.3 mm 9 mm 3.9 mm K1055.4311* 11 mm K1055.4313* 13 mm K1055.4316* 16 mm K1055.5009* 5.0 mm 9 mm 4.6 mm K1055.5011* 11 mm K1055.5013* 13 mm With CAMLOG® SCREW-LINE Implants with the diameters 3.8/4.3/5.0/6.0 mm, the option of Platform Switching is possible. Notes CAMLOG® SCREW-LINE Implants Promote® with Art. No. K1044.xxxx/K1045.xxxx/K1046.xxxx and CAMLOG® SCREW-LINE Implants Promote® plus with Art. No. K1054.xxxx/K1055.xxxx/K1056.xxxx can be used exclusively with the drivers Art. No. J5300.0031, J5300.0032, J5300.0033, J5300.0034, J5300.0035, J5300.0036 or J5300.0037. 1.4 mm L A 0.4 mm L A Implants with screw-mounted insertion post * P lease note: CAMLOG® SCREW-LINE Implants Promote® plus with Art. No. K1055.xxxx succeed Implants with Art. No. K1053.xxxx. Depending on your country CAMLOG® SCREW-LINE Implants Promote® plus with Art. No. K1053.xxxx might still be available for a longer period.
36 | CAMLOG® Product catalog 2020 * only for CONELOG® SCREW-LINE Implants length 7 mm SCREW-LINE Surgery set CAMLOG®/ CONELOG® J5317.0502 J5062.3309 J5062.3311 J5062.3313 J5062.3316 J5062.3809 J5062.3811 J5062.3813 J5062.3816 J5317.0501 J5050.2300 J5051.2800 J5051.2000 J5317.0503 J5054.3809 J5054.3309 J5053.3316 J5062.3807* J5062.5007* J5062.4307* J5015.3300 J5015.4300 J5015.3800 J5015.5000 J5015.3800 J5300.0036 J5300.0032 J5300.0033 J5300.0037 or J5322.0010 J5002.0011 J5300.0009 J5322.0011 J5002.0006 J5300.0008 J5300.0007 J5300.0031
Surgery CAMLOG® Product catalog 2020 | 37 J5300.2028 J5015.0009 J5015.0011 J5015.0013 J5054.5009 J5054.6009 J5054.4309 J5053.5016 J5053.6016 J5053.4316 J5053.3816 J5302.0010 J5320.1030 J5015.0007 J5062.6009 J5062.6011 J5062.6013 J5062.6016 J5062.4309 J5062.4311 J5062.4313 J5062.4316 J5062.5009 J5062.5011 J5062.5013 J5062.5016 J5015.4300 J5015.5000 J5015.6000 The drills are arranged and sorted in the set according to the treatment sequence. Color lines indicate the exact drilling sequence.
38 | CAMLOG® Product catalog 2020 SCREW-LINE Surgery set Preparation of the Implant bed for CAMLOG® SCREW-LINE Implants and for CONELOG® SCREW-LINE Implants is performed with identical instruments. Article Art. No. Surgery set CAMLOG®/CONELOG® SCREW-LINE contains all necessary surgical instruments sorted by color code, incl. torque wrench and holding key for insertion post (drills and taps for Ø 6.0 mm are not included) J5300.0063 Surgery tray CAMLOG®/CONELOG® SCREW-LINE without content J5300.8916 Surgery wash tray CAMLOG®/CONELOG® SCREW-LINE incl. pattern, without content J5300.8968 Pattern for surgery wash tray CAMLOG®/CONELOG® SCREW-LINE Material Aluminum J5300.1068
Surgery CAMLOG® Product catalog 2020 | 39 Surgical instruments Article Art. No. L Form drill SCREW-LINE resterilizable Material Stainless steel J5062.3309 3.3 mm 9 mm J5062.3311 11 mm J5062.3313 13 mm J5062.3316 16 mm J5062.3809 3.8 mm 9 mm J5062.3811 11 mm J5062.3813 13 mm J5062.3816 16 mm J5062.4309 4.3 mm 9 mm J5062.4311 11 mm J5062.4313 13 mm J5062.4316 16 mm J5062.5009 5.0 mm 9 mm J5062.5011 11 mm J5062.5013 13 mm J5062.5016 16 mm J5062.6009 6.0 mm 9 mm J5062.6011 11 mm J5062.6013 13 mm J5062.6016 16 mm Depth stop for form drills PROGRESSIVE-LINE and SCREW-LINE resterilizable Material Titanium alloy J5015.3300 3.3 mm - J5015.3800 3.8 mm J5015.4300 4.3 mm J5015.5000 5.0 mm J5015.6000 6.0 mm Form drill SCREW-LINE Cortical bone resterilizable Material Stainless steel J5053.3316 3.3 mm - J5053.3816 3.8 mm J5053.4316 4.3 mm J5053.5016 5.0 mm J5053.6016 6.0 mm Tap SCREW-LINE with hexagon, resterilizable Material Stainless steel J5054.3309 3.3 mm - J5054.3809 3.8 mm J5054.4309 4.3 mm J5054.5009 5.0 mm J5054.6009 6.0 mm
40 | CAMLOG® Product catalog 2020 SCREW-LINE Guide System Article Art. No. L Guide System pilot drill set internal irrigation, sterile (for pilot drilling Ø 2.0 mm) Material Stainless steel J5063.3311 3.3 mm 11 mm (incl. 5 and 9 mm)** J5063.3313 13 mm (incl. 5, 9 and 11 mm)** J5064.3316* 16 mm J5063.4309 3.8 mm 9 mm (incl. 5 mm)** 4.3 mm J5063.4311 3.8 mm 11 mm (incl. 5 and 9 mm)** 4.3 mm J5063.4313 3.8 mm 13 mm (incl. 5, 9 and 11 mm)** 4.3 mm J5064.4316* 3.8 mm 16 mm 4.3 mm Article Art. No. L Guide System surgery set, SCREW-LINE internal irrigation, sterile Material Stainless steel J5065.3311 3.3 mm 11 mm (incl. 5 and 9 mm)**** J5065.3313 13 mm (incl. 5, 9 and 11 mm)**** J5066.3316*** 16 mm J5065.3809 3.8 mm 9 mm (incl. 5 mm)**** J5065.3811 11 mm (incl. 5 and 9 mm)**** J5065.3813 13 mm (incl. 5, 9 und 11 mm)**** J5066.3816*** 16 mm J5065.4309 4.3 mm 9 mm (incl. 5 mm)**** J5065.4311 11 mm (incl. 5 and 9 mm)**** J5065.4313 13 mm (incl. 5, 9 and 11 mm)**** J5066.4316*** 16 mm *** Necessary Guide System form drill for Implant length 16 mm, following obligatory prior use of the Guide System surgery set length 13 mm. **** All Guide System surgery sets include a 5 mm long pre-drill, as well as all form drills necessary for the selected Implant length. All Guide System drills and gingiva punches for SCREW-LINE are intended for single use only. Notes CAMLOG® SCREW-LINE Implants with Art. No. K1045.xxxx/K1055.xxxx with screw-mounted insertion post can be used with the SCREW-LINE Guide System. The SCREW-LINE Guide System can only be used for Implant diameters 3.3/3.8/4.3 mm. * Necessary Guide System pilot drill for Implant length 16 mm, following obligatory prior use of the pilot drill set length 13 mm. ** All Guide System pilot drill sets include a 5 mm long pilot drill, as well as all pilot drills necessary for the selected Implant length.
Surgery CAMLOG® Product catalog 2020 | 41 Article Art. No. L Guide System form drill, SCREW-LINE, Cortical Bone internal irrigation, sterile Material Stainless steel J5068.3311 3.3 mm 11 mm J5068.3313 13 mm J5068.3316 16 mm J5068.3809 3.8 mm 9 mm J5068.3811 11 mm J5068.3813 13 mm J5068.3816 16 mm J5068.4309 4.3 mm 9 mm J5068.4311 11 mm J5068.4313 13 mm J5068.4316 16 mm Guide System gingiva punch sterile Material Stainless steel J5041.3303 3.3 mm - J5041.3803 3.8 mm J5041.4303 4.3 mm Guide System guiding sleeve height 3.0 mm (2 units) Material Titanium alloy J3734.3303* 3.3 mm - J3734.3803* 3.8 mm J3734.4303* 4.3 mm * only for use with SCREW-LINE Implants with screw-mounted insertion post All Guide System drills and gingiva punches for SCREW-LINE are intended for single use only.
42 | CAMLOG® Product catalog 2020 Article Art. No. L Guide System CAMLOG® Insertion post, screw-mounted for CAMLOG® Lab implant/implant analog, incl. fixing screw (2 units) Material Titanium alloy K2026.3303 3.3 mm - K2026.3803 3.8 mm K2026.4303 4.3 mm Guide System template drill for Guide System Guiding sleeve Material Stainless steel J3733.3300 3.3 mm - J3733.4300 3.8 mm 4.3 mm Guide System seating tool for Guide System Guiding sleeve Material Stainless steel J3716.3300 3.3 mm - J3716.4300 3.8 mm 4.3 mm Guide System check-up pin for Guide System Guiding sleeve Material Stainless steel J5301.3300 3.3 mm - J5301.4300 3.8 mm 4.3 mm Drill extension ISO shaft, for instruments with internal irrigation Material Stainless steel J5002.0005 - 26.6 mm SCREW-LINE Guide System
Surgery CAMLOG® Product catalog 2020 | 43 Article Art. No. L Round bur resterilizable Material Stainless steel J5050.2300 2.3 mm - Point drill resterilizable Material Stainless steel B1012* 1.5 mm 30.0 mm Pilot drill without coil, resterilizable Material Stainless steel J5051.2003 2.0 mm - Pilot drill SCREW-LINE resterilizable Material Stainless steel J5051.2000 2.0 mm - Pre-drill SCREW-LINE resterilizable Material Stainless steel J5051.2800 1.7 – 2.8 mm - General surgical instruments * Manufacturer: AXIS biodental SA, Les Rosées 5, 2336 Les Bois, Switzerland
44 | CAMLOG® Product catalog 2020 Article Art. No. L Depth stop SCREW-LINE for pilot drill ( J5051.2000) and pre-drill ( J5051.2800), resterilizable Material Stainless steel J5015.0009 - 9 mm J5015.0011 11 mm J5015.0013 13 mm Bone profiler Material Stainless steel Ø 5.0 mm J5003.3350 3.3 mm - Ø 6.0 mm J5003.4360 3.8 mm 4.3 mm Ø 7.0 mm J5003.5070 5.0 mm CAMLOG® Guiding pin for bone profiler Material Titanium alloy J5002.3300 3.3 mm - J5002.3800 3.8 mm J5002.4300 4.3 mm J5002.5000 5.0 mm Countersink Material Stainless steel Ø 4.6 mm J5006.3346 3.3 mm - Ø 5.2 mm J5006.3852 3.8 mm Ø 5.6 mm J5006.4356 4.3 mm Ø 6.3 mm J5006.5063 5.0 mm Baring drill for cover screw Material Stainless steel J5004.3300 3.3 mm - J5004.3800 3.8 mm J5004.4300 4.3 mm J5004.5000 5.0 mm General surgical instruments
Surgery CAMLOG® Product catalog 2020 | 45 Article Art. No. Dimension Paralleling pin SCREW-LINE with depth marks Material Titanium alloy J5300.2028 Ø 1.7 – 2.8 mm/ 2.0 mm Drill extension ISO shaft (not for drills with internal irrigation) Material Stainless steel J5002.0006 26.5 mm Tap adapter, short for tap SCREW-LINE Material Stainless steel J5322.0010 18.0 mm Tap adapter, long for tap SCREW-LINE Material Stainless steel J5322.0011 23.0 mm
46 | CAMLOG® Product catalog 2020 * only for use with CAMLOG® PROGRESSIVE-LINE Implants with Art. No. K1075.xxxx, K1076.xxxx and CAMLOG® SCREW-LINE Implants with Art. No. K1044.xxxx, K1045.xxxx, K1046.xxxx, K1054.xxxx, K1055.xxxx and K1056.xxxx. Article Art. No. Dimension Driver, extra short for screw Implants, manual/wrench Material Stainless steel J5300.0031* 13.7 mm Driver, short for screw Implants, manual/wrench Material Stainless steel J5300.0032* 19.2 mm Driver, long for screw Implants, manual/wrench Material Stainless steel J5300.0033* 24.8 mm Driver, short for screw Implants, with ISO shaft for angled hand piece (without hexagon at the shaft) Material Stainless steel J5300.0036* 19.1 mm Driver, long for screw Implants, with ISO shaft for angled hand piece (without hexagon at the shaft) Material Stainless steel J5300.0037* 28.2 mm Driver, short for screw Implants, with ISO-shaft for angled hand piece, for Hexagon clamping system Material Stainless steel J5300.0034* 19.1 mm Driver, long for screw Implants, with ISO-shaft for angled hand piece, for Hexagon clamping system Material Stainless steel J5300.0035* 28.2 mm General surgical instruments
Surgery CAMLOG® Product catalog 2020 | 47 Article Art. No. Dimension Cardanic driver (30°) adjustable length Material Stainless steel J5300.0038* - PickUp instrument holder for carrying Implants Material Stainless steel J5300.0030** - Adapter ISO shaft for angled hand piece Material Stainless steel J5002.0011 21.0 mm * only for use with CAMLOG® PROGRESSIVE-LINE Implants with Art. No. K1075.xxxx, K1076.xxxx and CAMLOG® SCREW-LINE Implants with Art. No. K1044.xxxx, K1045.xxxx, K1046.xxxx, K1054.xxxx, K1055.xxxx and K1056.xxxx. ** o nly for use with CAMLOG® PROGRESSIVE-LINE Implants (with snap-in insertion post) with Art. No. K1076.xxxx and CAMLOG® SCREWLINE Implants with Art. No. K1042.xxxx, K1046.xxxx, K1052.xxxx and K1056.xxxx.
48 | CAMLOG® Product catalog 2020 Article Art. No. Dimension Holding key for insertion post Material Stainless steel J5302.0010 - - CAMLOG® Adapter for screw Implants, short for CAMLOG® Implants Material Stainless steel K5302.3311 3.3 mm 29.8 mm K5302.3811 3.8 mm K5302.4311 4.3 mm K5302.6011 5.0 mm 6.0 mm CAMLOG® Adapter for screw Implants, long for CAMLOG® Implants Material Stainless steel K5302.3310 3.3 mm 34.8 mm K5302.3810 3.8 mm K5302.4310 4.3 mm Holding sleeve for screw Implants color-coded Material Titanium alloy J5302.3300 3.3 mm - J5302.3800 3.8 mm J5302.4300 4.3 mm J5302.5000 5.0 mm J5302.6000 6.0 mm Screwdriver hex, extra short, manual/wrench Material Stainless steel J5317.0510 - 14.5 mm Screwdriver hex, short, manual/wrench Material Stainless steel J5317.0501 - 22.5 mm Screwdriver hex, long, manual/wrench Material Stainless steel J5317.0502 - 30.3 mm General surgical instruments
Surgery CAMLOG® Product catalog 2020 | 49 Article Art. No. Dimension Screwdriver hex, short, ISO shaft Material Stainless steel J5317.0504 18.0 mm Screwdriver hex, long, ISO shaft Material Stainless steel J5317.0503 26.0 mm Manual screwdriver, hex without wrench head connection Material Stainless steel J5317.0511 23.0 mm Cleaning needle for instruments with internal irrigation Material Stainless steel J5002.0012 - Cleaning cannula for drills with internal irrigation Material Stainless steel J5002.0020 -
50 | CAMLOG® Product catalog 2020 Article Art. No. Osteotomy set CAMLOG®/CONELOG® SCREW-LINE straight convex Material Stainless steel J5418.0020 - Pre-Osteotome SCREW-LINE straight convex Material Stainless steel J5417.2800* 1.7 – 2.8 mm Osteotome SCREW-LINE straight convex Material Stainless steel J5418.3300* 3.3 mm J5418.3800* 3.8 mm J5418.4300* 4.3 mm J5418.5000* 5.0 mm J5418.6000* 6.0 mm SCREW-LINE Osteotomy set * These products are also included in the osteotomy set CAMLOG®/CONELOG® SCREW-LINE straight convex.
Surgery CAMLOG® Product catalog 2020 | 51 Article Art. No. Osteotomy set CAMLOG®/CONELOG® SCREW-LINE angled convex Material Stainless steel J5418.0030 - Pre-Osteotome SCREW-LINE straight convex Material Stainless steel J5417.2800* 1.7 – 2.8 mm Osteotome SCREW-LINE angled convex Material Stainless steel J5418.3310* 3.3 mm J5418.3810* 3.8 mm J5418.4310* 4.3 mm J5418.5010* 5.0 mm J5418.6010* 6.0 mm * These products are also included in the osteotomy set CAMLOG®/CONELOG® SCREW-LINE angled convex.
52 | CAMLOG® Product catalog 2020 * These products are also included in the osteotomy set CAMLOG®/CONELOG® SCREW-LINE straight concave. Article Art. No. Osteotomy set CAMLOG®/CONELOG® SCREW-LINE straight concave Material Stainless steel J5420.0020 - Pre-Osteotome SCREW-LINE straight concave Material Stainless steel J5419.2800* 1.7 – 2.8 mm Osteotome SCREW-LINE straight concave Material Stainless steel J5420.3300* 3.3 mm J5420.3800* 3.8 mm J5420.4300* 4.3 mm J5420.5000* 5.0 mm J5420.6000* 6.0 mm SCREW-LINE Osteotomy set
Surgery CAMLOG® Product catalog 2020 | 53 Article Art. No. Osteotomy set CAMLOG®/CONELOG® SCREW-LINE angled concave Material Stainless steel J5420.0030 - Pre-Osteotome SCREW-LINE straight concave Material Stainless steel J5419.2800* 1.7 – 2.8 mm Osteotome SCREW-LINE angled concave Material Stainless steel J5420.3310* 3.3 mm J5420.3810* 3.8 mm J5420.4310* 4.3 mm J5420.5010* 5.0 mm J5420.6010* 6.0 mm * These products are also included in the osteotomy set CAMLOG®/CONELOG® SCREW-LINE angled concave.
RkJQdWJsaXNoZXIy MTE0MzMw