CAMLOG® Product catalog 2020 | 7 System information CAMLOG® Temporary abutments Various abutments are available for the CAMLOG® Implant System for temporary prosthetic restorations. CAMLOG® Temporary abutments made of titanium alloy (Ti6Al4V ELI) are available in crown and bridge versions. As an option, temporary restoration on CAMLOG® Implants can also be performed with temporary abutments made of PEEK (poly ether ether ketone). Also as option for Platform Switching (PS). The abutments can be used in immediate implantations or after exposing the gingiva. CAMLOG® Titanium bases CAD / CAM CAMLOG® Titanium bases CAD/CAM are acting as a bonding basis for customized, Implant-supported dental restorations made of suitable materials. Reconstructions are fabricated with the aid of CAD/CAM techniques. CAMLOG® Titanium bases CAD/CAM are available in crown and bridge versions. Optionally a Titanium base CAD/CAM crown PS is also available for Platform Switching. CAMLOG® Esthomic® Abutments Anatomically preformed abutments allow for optimal stump design. The CAMLOG® Esthomic® Abutments are available both straight and angled with various gingival heights and with an oval anatomically pre-shaped shoulder profile. The angled Esthomic® Abutments are available in A and B versions differentiated by a cam offset of 60°. This results in six prosthetic- oriented rotating positions and allows perfect prosthetic alignment of the axes. CAMLOG® Esthomic® Abutment cam alignment Type A Cam alignment against the angle Type B Cam alignment in direction of the angle Type A Type B Cams with 60° offset
RkJQdWJsaXNoZXIy MTE0MzMw