Additional documentation CAMLOG® Product Catalog 2025 | 133 Further documentation Further information on the CAMLOG® Products can be found in the following documents: CAMLOG® Working Instructions CAMLOG® Instructions for Use Preparation instructions Camlog literature overview Clinical evidence and science The documents are available from the local Camlog representative. See also: https://ifu.camlog.com www.camlog.com References 1 Conserva E. Initial stability after placement of a new buttress-threaded implant. A case series study. Implants. 2019(3): 24-28. 2 Ruppin J. One-year clinical experience with Progressive-Line implants. EDI journal. 2020(4): 54-63. 3 CAMLOG® IMPLANT SYSTEM/CONELOG® IMPLANT SYSTEM – Die Promote® Oberfläche – eine hochmoderne Titanoberfläche für die Implantologie. M-0173-WPR-DACH-CL-00-022022. 4 Semper-Hogg W, Kraft S, Stiller S, Mehrhof J, Nelson K. Analytical and experimental position stability of the abutment in different dental implant systems with a conical implant-abutment connection. Clin Oral Investig. 2013;17(3): 1017-23. 5 Semper-Hogg W, Zulauf K, Mehrhof J, Nelson K. The influence of torque tightening on the position stability of the abutment in conical implant-abutment connections. Int J Prosthodont 2015;28(5):538-41. Legal General disclaimer The information provided is intended for marketing purposes only and does not qualify the user to use the product in a clinical setting. To ensure correct application, please refer to the relevant Instructions for Use and the Working Instructions before use. Trademarks and copyright Protected trade names (trademarks) are not always specially indicated. The absence of such a reference does NOT mean that it is not a protected trademarked name. The document including all its parts is protected by copyright. You may download the content regarding the intended use, but changes to or reproduction of the content are not permitted. Any use outside the narrow limits of copyright law without the prior written consent of CAMLOG Biotechnologies GmbH is prohibited and is subject to legal sanctions. Unless otherwise stated, all product names, whether printed in capital letters or accompanied by the trademark symbol, are trademarks of BioHorizons Inc. or CAMLOG Biotechnologies GmbH, their subsidiaries, affiliated companies, or their licensors. Locator®, Locator R-Tx®, R-Tx, ZEST, and Zest Dental Solutions, as well as the color and shape of the replacement males, are registered trademarks of ZEST IP Holdings, LLC. Dalbo®-Plus is a registered trademark of Cendres + Métaux SA, Biel, Switzerland. DIM-Analog® is a registered trademark of the IPD Dental Group company. The referenced trademarks may not be registered in all countries. All third party trademarks belong to the respective trademark owners. CAMLOG Biotechnologies GmbH can only place products on the market after approval by the competent national authorities. Therefore, not all products and services are available in all countries. Manufacturer CAMLOG® and CONELOG® Products are manufactured by: ALTATEC GmbH | Maybachstr. 5 | 71299 Wimsheim | Germany Customized DEDICAM® Products are manufactured by: ALTATEC GmbH | Maybachstr. 5 | 71299 Wimsheim | Germany or Biotech Dental Digital SAS | 305 Allées de Craponne | 13300 Salon de Provence | France Locator® and Locator R-Tx® are manufactured by Zest Anchors LLC. Dalbo®-Plus is manufactured by Cendres + Métaux SA, Biel, Switzerland. The drill shaft extension is manufactured by Gebr. Brasseler GmbH & Co. KG, Lemgo, Germany. The torque wrench 10–70 Ncm is manufactured by Josef Ganter Feinmechanik GmbH, Dauchingen, Germany. DIM-Analog® is manufactured by IMPLANT PROTESIS DENTAL 2004 S.I., Premià de Dalt (Barcelona), Spain.
RkJQdWJsaXNoZXIy MTE0MzMw