CONELOG® TITANIUM BASE CAD/CAM CONELOG® TITANIUM BASE CAD/CAM The Titanium base CAD/CAM enables restorations with individual, two-part abutments made from suitable materials on SCREW-LINE implants. It is available in two gingival heights (0.8 and 2 mm) and is used as a bonding base for individual implant-supported reconstructions such as mesostructures and superstructures. For simplification of the process flow, a dark purple anodized abutment screw and a bonding aid are included in each packaging. To extend their scope of use, the geometries of the new Titanium bases CAD/ CAM, the modelling aids, the abutment and lab screws have been adapted to accommodate the Sirona inCoris ZI meso blocks. ALL BENEFITS AT A GLANCE • Implant-abutment connection with tapered inner geometry for a precise, stable and antirotational connection • Available in two gingival heights for optimal adaptation to the vertical implant position and the emergence profile • Large bonding surface for high stability and reliable adhesion of the bonding • Bonding aid and abutment screw for Titanium base CAD/CAM included • Unambiguous and fast positioning of the Titanium base CAD/CAM thanks to the precise abutment guidance in the implant • Easy removal of the Titanium base CAD/CAM from the implant with the disconnector • Integrated in the Sirona work process (can be used with the inCoris meso blocks) TITANIUM BASE CAD/CAM SAFE CONNECTION BETWEEN IMPLANT AND INDIVIDUALLY CAD/CAM-FABRICATED PROSTHETIC RESTORATION CONELOG® MODELING AID The modeling aid helps simplify the fabrication of mesostructures and crown frameworks on the Titanium base CAD/CAM and comes color-coded for implant diameters 3.3/3.8/4.3/5.0 mm. The modeling aid burns residue-free and can be individually shortened. PROCESSING OPTIONS Direct scanning of a wax-up fabricated on a modeling aid. Alternatively, the wax-up can be cast into a framework using the casting technique or pressed into a framework using the pressing technique. ALL BENEFITS AT A GLANCE • Simple fabrication of a wax-up for scanning or a casted, respectively pressed, prosthetic restoration • Inner configuration provides the optimal bonding space to the titanium base for the casting and pressing technique • Extended design of the cervical edge enables good modeling • Retention indentations for good adhesion of the modeling material • Self-retaining on the titanium base Retention indentations for good adhesion of the modeling material Extended cervical edge Gingival height 2.0mm Prosthetic height 6.7 mm Antirotational protection for the prosthetic restoration 11.0mm 4.7mm Visualization of the rotational protection Gingival height 0.8mm 4.7mm Prosthetic height 5.5 mm

CONELOG® BONDING AID Using the bonding aid, the Titanium base CAD/CAM can easily be screwed onto the lab analog by hand. This protects the screw channel when blasting the titaniumbase and avoids glue flowing into the screw channel during bonding of the prosthetic restoration. Bonding aids are included with the titanium bases. ALL BENEFITS AT A GLANCE • Easy screwing of the Titanium base CAD/CAM to the lab analog without a screw driver • Protection of the screw channel during sandblasting • Prevents glue flowing into the screw channel CONELOG® SCANPOST DIGITALACQUISITIONOF CONELOG® IMPLANTSOR LABANALOGS WITH THE SIRONA SYSTEM. The new scanpost for the Sirona scanbody is a connecting piece for intraoral and extra-oral use between the implant or lab analog and the scanbodies provided by Sirona. This enables digital acquisition of the implant position relative to the remaining dentition and the soft tissue. ALL BENEFITS AT A GLANCE • Precise fit of the Sirona scanbody to the scanpost • Integration of the CONELOG implant into the SIRONA work process • No height offset due to direct support on the implant shoulder CONELOG® SCANBODY SCAN-TECHNICAL ACQUISITION OF THE CONELOG® IMPLANT / LAB ANALOG POSITION The scanbody is used for the optical 3-dimensional intraoral localization of implants and of lab analogs in the working model. Scanbodies are available for implant diameters 3.3/3.8/4.3/5.0 mm and are supplied sterile including an abutment screw. ALL BENEFITS AT A GLANCE • Unambiguously scannable geometry for precise digital measuring of the implant position • No height offset due to direct placement on the implant shoulder • Sterile scanbody for immediate intraoral application • Highly resistant plastic material for lab-technical multiple use CONELOG® ABUTMENT SCREW FOR TITANIUM BASE CAD/CAM The Titanium base CAD/CAM is supplied with a new dark purple anodized abutment screw. The abutment screw is also available individually. The abutment screw has a smaller screw head diameter and can thus accommodate the Sirona inCoris ZI meso blocks. The new abutment screw is to be used exclusively for the Titaniumbase CAD/ CAM. CONELOG® TITANIUM BASE CAD/CAM

Subject to change · X.J6362.06/2015 HEADQUARTERS CAMLOG Biotechnologies AG | Margarethenstr. 38 | 4053 Basel | Switzerland Phone +41 61 565 41 00 | Fax +41 61 565 41 01 | | Manufacturer of CAMLOG® and CONELOG® products: ALTATEC GmbH | Maybachstr. 5 | 71299 Wimsheim | Germany