Scan bodies for scanning at implant level The scan bodies are used for optical three-dimensional localization of implants in the mouth and implant analogs in the working model. This enables an exact transfer of the implant position to the suitable CAD software. For CAMLOG, CONELOG, iSy and BioHorizons there are scan bodies made from either PEEK or Titanium available. The ones made from PEEK are recommended for use with desktop scanners, the Titanium ones for intraoral use. The PEEK scan bodies for the CAMLOG, CONELOG and iSy implant systems are delivered sterile and also allow immediate intraoral use. The scan geometries of the scan bodies are part of the DEDICAM CAD libraries for all implant-supported restorations. Note Names marked with ® are registered trademarks of their respective manufacturers (see page 122). CAMLOG® Implant System Article CAMLOG® scan bodies Can be used without scan spray, incl. abutment screw Material PEEK (poly ether ether ketone, sterile) Titanium alloy (Ti-6Al-4V, unsterile) PEEK Titanium alloy CONELOG® Implant System Article CONELOG® scan bodies Can be used without scan spray, incl. abutment screw Material PEEK (poly ether ether ketone, sterile) Titanium alloy (Ti-6Al-4V, unsterile) PEEK Titanium alloy iSy® Implant System Article iSy® scan bodies Can be used without scan spray, incl. abutment screw Material PEEK (poly ether ether ketone, sterile) Titanium alloy (Ti-6Al-4V, unsterile) PEEK Titanium alloy 14 | DEDICAM® Product Catalog 2025
RkJQdWJsaXNoZXIy MTE0MzMw