The iSy® Implant System demonstrates its unique talents in numerous indications. Its intelligence allows the clinician to focus on what is most common in their everyday implant practice. * DEDICAM This is where iSy® comes into its own iSy® indications and techniques Single tooth Bridge Edentulous Workflow Analog Digital Surgery Transgingival Submerged Restoration Temporary restoration Screw-retained – * Cemented n/a Locator® n/a n/a 3 This is iSy®
Micro-macro thread for high primary stability and best possible guidance during implant insertion. Coronal parallel-walled implant design, apical tapered implant design. Allows fine adjustment of the vertical implant position during insertion. Proven Promote® plus implant surface. Sandblasted and acid-etched. 2+2 cutting groove design for perfect performance during tapping. The characteristics and high quality of the iSy® Implants are easy to see when put into practice. The modern iSy® Implant design and thread assure high primary stability whereby the proven Promote® surface provides rapid osseointegration and is responsible for long-term stable bone apposition. State-of-the-art design
Total quality control iSy® is quality made by CAMLOG. The system components are manufactured in Germany – always paying attention to detail, sustain- ability and the long-term further develop- ment. Our experienced team conducts the inspections and documentation of our products through all production stages, ensuring quality assurance throughout. During manufacture, the iSy® Implants pass through 15 quality checks with a total of 140 test criteria. Quality Assurance System, according to EN ISO 13485. This standard governs the criteria to ensure total quality assurance. The medical device manufacturer ALTATEC GmbH is certified according to EN ISO 13485 and complies with the provisions of Guideline 93/42/EEC. Self-locking tapered connection (7.5°) with internal hex and integrated platform switch as found elsewhere on Camlog and Biohorizons Websites. Pre-mounted implant base for transgingival healing and prosthetic restoration at abutment level allows innovative concepts with only one abutment shift. 5 This is iSy®
Single patient form drill 2 Multifunctional caps (impression taking, scanning, temporary restoration and bite registration) iSy® Implant with pre-mounted implant base Gingiva former Cover cap iSy® comes complete with everything an implant case needs. Enclosed with the implants and its pre-mounted implant base, the all-in sets contain a single patient form drill, a gingiva former, and two multifunctional caps. A cover cap is also included, however you only need this if submerged healing proves necessary. All-in-set of 4 4 Implants with pre-mounted implant base 4 Cover caps 4 Gingiva formers 8 Multifunctional caps 1 Single patient form drill All-in-set of 1 1 Implant with pre-mounted implant base 1 Cover cap 1 Gingiva former 2 Multifunctional caps 1 Single patient form drill Components of the single implant set: 7 This is iSy®
iSy® Implants are available in four lengths and three diameters. This allows for safe therapy in all available indications. 7.3 mm implants are a good solution for low vertical bone availability. The iSy® Implant System also offers considerable freedom in prosthetics. It has a standardized connection for all implants and abutments. This means that all prosthetic sizes fit every implant and can be used according to the individual criteria of the case. The Esthomic® Abutments are available in two gingival heights. This also applies to the titanium base CAD/CAM, which is available in two prosthetic diameters. The iSy® Implant System has a standardized connection for all implants and abutments. This excludes any mix and match solutions. The titanium base CAD/CAM is available in two different gingival heights: a secure connection between implant and prosthetic. iSy® Implants are available in four lengths and three diameters. The 7.3 mm implants are a good solution for low vertical bone availability. Implants: Lengths: + 7.3 mm + 9.0 mm + 11.0 mm + 13.0 mm Diameters: + 3.8 mm + 4.4 mm + 5.0 mm 9 This is iSy®
iSy® is designed for time-optimized workflows and reduced surgery with its packaging concept, the drilling sequence, and the pre-mounted implant base including accessories. This connects iSy® with digital processes in prosthetics and thus creates an added value for users and patients.
3 2 1 vs. 4 iSy® drilling protocol: only two drilling steps to prepare the final implant bed. The clearly structured iSy® surgical and prosthetic set provides room for the most important instruments for inserting iSy® Implants and for prosthetic restoration. With iSy®, the super lean processes already start when ordering, as all parts necessary for initial restoration are included in one pack. Placing the implant Drilling the final implant bed with the single patient form drill Pre-drilling the implant bed with the pilot drill Marking the drilling site with the round bur 11 This is iSy®
iSy® makes the handling of transgingival healing easier and quicker thanks to its snap-on solution. With only a single abutment change, the workflows remain super lean and the treatment period comparably short. Option 1: Transgingival healing with the impression and a temporary restoration snapped directly on to the implant base. This option is the most time- and cost-efficient, and offers the advantage of not requiring a change of abutment. Option 2: Transgingival healing with the impression on the implant base and a restoration on pre-fabricated abutments or individual abutments (e. g. DEDICAM®). There is only one abutment change (one-shift). Snap-on solutions In addition, there is the option of submerged healing with the cover cap. Esthomic® Gingiva formers, Esthomic® Abutments and impression posts are available for the classical two-stage procedure. (temp. crown)
13 This is iSy®
Standardized restorations are quick and easy to implement. The components are simply snapped on to the pre-mounted implant base. The one-stage procedure is indicated when the alveolar bone is sufficient for implantation and if good results can be assured both in functional and esthetic terms. Using a deep-drawn splint and a shortened multifunctional cap, the temporary restoration can be fabricated chairside time-effectively, similar to a crown restoration. Depending on the indication and the objective, iSy® offers numerous other solutions to complete efficient restorations in just one day.
Incision was designed such that dense soft tissue adaptation around the transmucosal implant structures is facilitated. 1 After exposure of the jaw bone, this was followed by the preparation of the implant bed using the reduced iSy® drilling protocol and insertion of the iSy® Implant. 2 This specific incision allowes a tight and tension-free closure of the soft tissue around the transmucosal iSy® implant base. 3 After closure of the soft tissue, the multifunctional cap was shortened to corresponding to the occlusion, and mounted on the implant base. 4 The deep-drawn splint was placed over the row of teeth to check the space available for the temporary plastic and occlusal distance. 5 The multifunctional cap was conditioned, plastic applied to the splint and the subgingival emergence profile filled extraorally following the polymerization period. 6 The temporary restoration was finished and clicked onto the implant base and the occlusal contacts were removed. After one week, the sutures were removed. 7 Case report: Dr Steffen Kistler, Landsberg am Lech Imagine providing a restoration in a single day. 15 This is iSy®
1 Place the iSy® Implant 2 Click in to the iSy® scan adapter for Sirona 3 Snap on to the Sirona scanbody 4 Select titanium base CAD/CAM and “ScanPost” as scanbody type 5 For scan with CEREC® Omnicam 6 Remove scan components SCAN SELECTION
One click One scan One shift iSy® is a good alternative for those working with CEREC®. Some work steps are eliminated completely with iSy®, others are simplified considerably. CEREC® IS A REGISTERED TRADEMARK OF DENTSPLY SIRONA. 7 Snap on to the gingiva former 8 Design crown 9 Mill crown 10 Finish crown 11 Remove the implant base 12 Insert the crown DESIGN 17 This is iSy®
The iSy® Implant System is connected perfectly to computer-aided design and fabrication processes via various interfaces for oral and laboratory scans. This makes a customized CAD/CAM-fabricated prosthetic restoration very easy with iSy®. It makes no difference, whether you work with a chairside system, a labside system or an external CAD/CAM service provider. With DEDICAM®, iSy® covers a broad spectrum of constructions: one-piece abutments and gingiva formers, mesostructures and crowns for titanium bases as well as direct screw retention for bridges (with six implants minimum) and bars (with four implants minimum). The mesostructures and crowns are available in a choice of two materials: Zirlux® FC2 and IPS e.max® CAD. DEDICAM® provides you with exemplary service and quality control across all process steps. And it becomes even easier with the DEDICAM® Scan & Design Service, which can take on the entire digital realization according to your specifications. This allows you to design and produce digital prosthetics without any CAD equipment. More information at www.camlog.de/cadcam or by telephone at +4970449445-800 Digital solutions for a digital world. Digital interfaces: the process chain starts with an oral scan or cast situation. To accomplish this, the iSy® Multifunctional cap on the iSy® Implant base, the iSy® ScanPost on the iSy® Implant, the iSy® ScanPost for Sirona on the iSy® Implant (compatible with Sirona Scanbodies S*) and the iSy® ScanAdapter for Sirona on the iSy® Implant base (compatible with Sirona Scanbodies S*) are available. (from left to right). * Information about the Sirona Scanbodies is available from Sirona Dental Systems GmbH.
CAD/CAM ready The DEDICAM® Portfolio for iSy® includes a broad spectrum of CAD/CAM-fabricated constructions. 19 This is iSy®
The iSy® Implant System addresses patients’ wishes for as little surgery as possible, short treatment times and a perfect cost-benefit ratio. The first-class quality and function of all system components is designed for maximum efficiency of workflows in order to provide increasing patients with high quality implant prosthetics. 21 This is iSy®
A lean portfolio, a solid performance: iSy® products at a glance iSy® Implants All-in-set of 1 Set contents: Quantity Product 1 iSy® Implant Promote® plus with pre-mounted implant base 1 Single patient form drill 1 Cover cap 1 Gingiva former 2 Multifunctional caps Diameter Length 7.3 mm Length 9 mm Length 11 mm Length 13 mm Ø 3.8 mm P1110.3807 P1110.3809 P1110.3811 P1110.3813 Ø 4.4 mm P1110.4407 P1110.4409 P1110.4411 P1110.4413 Ø 5.0 mm P1110.5007 P1110.5009 P1110.5011 P1110.5013
The following pages contain a detailed list of the iSy® System’s individual components. All the information you need at your finger tips. iSy® Implants All-in-set of 4 Set contents: Quantity Product 4 iSy® Implants Promote® plus with pre-mounted implant base 1 Single patient form drill 4 Cover caps 4 Gingiva formers 8 Multifunctional caps Diameter Length 7.3 mm Length 9 mm Length 11 mm Length 13 mm Ø 3.8 mm P1410.3807 P1410.3809 P1410.3811 P1410.3813 Ø 4.4 mm P1410.4407 P1410.4409 P1410.4411 P1410.4413 Ø 5.0 mm P1410.5007 P1410.5009 P1410.5011 P1410.5013 23 This is iSy®
GH: gingival height Healing caps Description Art. No. iSy® Esthomic® Healing cap, size S, sterile Ø 5.3 mm, GH 3.0 mm P2014.3830 iSy® Esthomic® Healing cap, size S, sterile Ø 5.4 mm, GH 4.5 mm P2014.3845 iSy® Esthomic® Healing cap, size S, sterile Ø 5.4 mm, GH 6.0 mm P2014.3860 iSy® Esthomic® Healing cap, size M, sterile Ø 5.8 mm, GH 3.0 mm P2014.4430 iSy® Esthomic® Healing cap, size M, sterile Ø 5.9 mm, GH 4.5 mm P2014.4445 iSy® Esthomic® Healing cap, size M, sterile Ø 5.9 mm, GH 6.0 mm P2014.4460 iSy® Esthomic® Healing cap, size L, sterile Ø 6.3 mm, GH 3.0 mm P2014.5030 iSy® Esthomic® Healing cap, size L, sterile Ø 6.6 mm, GH 4.5 mm P2014.5045 iSy® Esthomic® Healing cap, size L, sterile Ø 6.6 mm, GH 6.0 mm P2014.5060
Surgical instruments Description Art. No. iSy® Surgery and prosthetic set contains all necessary surgical and prothetical instruments P5330.0100 Point drill, resterilizable, length 30 mm, Ø 1.5 mm, stainless steel J5051.1500 Round bur, Ø 3.5 mm J5050.3500 iSy® Pilot drill, Ø 2.8 mm P5051.2202 iSy® Single patient form drill, sterile, Ø 3.8 mm (3 units) P5040.3801 iSy® Single patient form drill, sterile, Ø 4.4 mm (3 units) P5040.4401 iSy® Single patient form drill, sterile, Ø 5.0 mm (3 units) P5040.5001 iSy® Direction and depth indicator (2 units) P5300.2201 iSy® Tap, Ø 3.8 mm P5054.3801 iSy® Tap, Ø 4.4 mm P5054.4401 iSy® Tap, Ø 5.0 mm P5054.5001 iSy® Tap adapter for iSy® Tap P5322.0012 iSy® Handle for gingiva formers and caps, short, length 17 mm P5300.6048 25 This is iSy®
Surgical instruments Description Art. No. iSy® Handle, for gingiva formers and caps, long, length 25 mm P5300.6050 iSy® Implant insertion tool, extra short, manual/wrench, length 14.5 mm P5300.6028 iSy® Implant insertion tool, short, manual/wrench, length 21 mm P5300.6030 iSy® Implant insertion tool, long, manual/wrench, length 29 mm P5300.6032 iSy® Implant insertion tool ISO, short, with ISO shaft P5300.6010 iSy® Guide and holding key P5302.0015 iSy® Adapter for guide and holding key, height 7 mm P5302.0016 iSy® Drill extension, ISO shaft, length 26.5 mm P5002.0006 iSy® ISO adapter, manual/wrench, length 21 mm P5002.0011 Surgical and prosthetic instruments Description Art. No. iSy® Torque wrench P5320.1030 iSy® Abutment screwdriver, extra short, manual/wrench, length 14.5 mm P5316.6038 iSy® Abutment screwdriver, short, manual/wrench, length 23 mm P5316.6040 iSy® Abutment screwdriver, long, manual/wrench, length 28 mm P5316.6042
Surgical and prosthetic instruments Description Art. No. iSy® Hex screwdriver, extra short, manual/ wrench, length 14.5 mm P5317.0538 iSy® Hex screwdriver, short, manual/wrench, length 22.5 mm P5317.0540 iSy® Hex screwdriver, long, manual/wrench, length 30.3 mm P5317.0542 iSy® Hex screwdriver, short, ISO shaft, length 18 mm P5317.0550 iSy® Hex screwdriver, long, ISO shaft, length 26 mm P5317.0552 iSy® Abutment disconnector, extra short, for abutments and implant base, length 23 mm P5300.6308 iSy® Abutment disconnector, short, for abutments and implant base, length 28 mm P5300.6310 iSy® Abutment disconnector, long, for abutments and implant base, length 35 mm P5300.6312 Driver for Locator® Abutment, manual/ratchet J2253.0001 Locator® Instrument, 3-part J2253.0002 Locator® Angle measurement guide J2253.0003 Locator® Parallel post (4 units) J2253.0004 iSy® Gingiva height indicator, straight, titanium alloy P3550.2200 27 This is iSy®
Auxiliary articles for surgery Description Art. No. iSy® Implant base, incl. iSy® Abutment screw and gingiva former, sterile P2900.0002 iSy® Cover cap (PEEK), sterile (3 units) P2015.0006 iSy® Gingiva former (PEEK), cylindrical, for implant base, sterile (3 units) P2015.4036 iSy® Cover screw, sterile (3 units) P2019.0001 iSy® Abutment screw, sterile P4005.1614 Scanning and impression-taking Description Art. No. iSy® Multifunctional cap (PEEK), sterile (3 units) P2130.4004 iSy® Scanbody on implant level (PEEK), incl. iSy® Abutment screw, sterile P2600.0001 iSy® ScanPost for Sirona, incl. iSy® Abutment screw P2620.0006 iSy® Scan adapter for Sirona P2620.0007 iSy® Handle for iSy® Scan adapter P2620.1000 iSy® Impression post, open tray, size S, Ø 5.4 mm, incl. fixing screw P2121.3800
PEEK: Polyether ether ketone Scanning and impression-taking Description Art. No. iSy® Impression post, open tray, size M, Ø 5.9 mm, incl. fixing screw P2121.4400 iSy® Impression post, open tray, size L, Ø 6.6 mm, incl. fixing screw P2121.5000 iSy® Impression post, closed tray, size S, Ø 5.4 mm, incl. fixing screw, impression cap and bite registration cap P2110.3800 iSy® Impression post, closed tray, size M, Ø 5.9 mm, incl. fixing screw, impression cap and bite registration cap P2110.4400 iSy® Impression post, closed tray, size L, Ø 6.6 mm, incl. fixing screw, impression cap and bite registration cap P2110.5000 Impression cap for impression post, closed tray, size S (5 units) J2111.3800 Impression cap for impression post, closed tray, size M (5 units) J2111.4300 Impression cap for impression post, closed tray, size L (5 units) J2111.5000 Bite registration cap size S (5 units) J2112.3800 Bite registration cap size M (5 units) J2112.4300 Bite registration cap size L (5 units) J2112.5000 29 This is iSy®
Abutments Description Art. No. iSy® Temporary abutment for crown, Ø 3.9 mm, incl. iSy® Abutment screw P2239.3900 iSy® Temporary abutment for crown, Ø 4.8 mm, incl. iSy® Abutment screw P2239.4800 iSy® Universal abutment, Ø 6.5 mm, incl. iSy® Abutment screw P2211.4012 iSy® Esthomic® Abutment, inset, Ø 3.8 mm, GH 2.0–3.3 mm, incl. iSy® Abutment screw P2235.3820 iSy® Esthomic® Abutment, straight, size S, Ø 5.4 mm, GH 1.5–2.5 mm, incl. iSy® Abutment screw P2226.3815 iSy® Esthomic® Abutment, straight, size S, Ø 5.4 mm, GH 3.0–4.5 mm, incl. iSy® Abutment screw P2226.3830 iSy® Esthomic® Abutment, straight, size M, Ø 5.9 mm, GH 1.5–2.5 mm, incl. iSy® Abutment screw P2226.4415 iSy® Esthomic® Abutment, straight, size M, Ø 5.9 mm, GH 3.0–4.5 mm, incl. iSy® Abutment screw P2226.4430 iSy® Esthomic® Abutment, straight, size L, Ø 6.6 mm, GH 1.5–2.5 mm, incl. iSy® Abutment screw P2226.5015 iSy® Esthomic® Abutment, straight, size L, Ø 6.6 mm, GH 3.0–4.5 mm, incl. iSy® Abutment screw P2226.5030
Abutments Description Art. No. iSy® Esthomic® Abutment, 15° angled, size S, Ø 5.4 mm, GH 1.5–2.5 mm, incl. iSy® Abutment screw P2227.3815 iSy® Esthomic® Abutment, 15° angled, size S, Ø 5.4 mm, GH 3.0–4.5 mm, incl. iSy® Abutment screw P2227.3830 iSy® Esthomic® Abutment, 15° angled, size M, Ø 5.9 mm, GH 1.5–2.5 mm, incl. iSy® Abutment screw P2227.4415 iSy® Esthomic® Abutment, 15° angled, size M, Ø 5.9 mm, GH 3.0–4.5 mm, incl. iSy® Abutment screw P2227.4430 iSy® Esthomic® Abutment, 15° angled, size L, Ø 6.6 mm, GH 1.5–2.5 mm, incl. iSy® Abutment screw P2227.5015 iSy® Esthomic® Abutment, 15° angled, size L, Ø 6.6 mm, GH 3.0–4.5 mm, incl. iSy® Abutment screw P2227.5030 iSy® Titanium base CAD/CAM, Ø 4.5 mm, GH 0.8 mm, incl. iSy® Abutment screw and bonding aid P2244.4408 iSy® Titanium base CAD/CAM, Ø 4.5 mm, GH 2.0 mm, incl. iSy® Abutment screw and bonding aid P2244.4420 iSy® Titanium base CAD/CAM, Ø 5.2 mm, GH 0.8 mm, incl. iSy® Abutment screw and bonding aid P2244.5008 iSy® Titanium base CAD/CAM, Ø 5.2 mm, GH 2.0 mm, incl. iSy® Abutment screw and bonding aid P2244.5020 31 This is iSy®
Locator R-Tx® components Description Art. No. iSy® Locator R-Tx® Abutment, incl. Titanium housing with processing replacement male black, Block-out spacer white and four different retention inserts, GH 1.0 mm 30810-01 iSy® Locator R-Tx® Abutment, incl. Titanium housing with processing replacement male black, Block-out spacer white and four different retention inserts, GH 2.0 mm 30810-02 iSy® Locator R-Tx® Abutment, incl. Titanium housing with processing replacement male black, Block-out spacer white and four different retention inserts, GH 3.0 mm 30810-03 iSy® Locator R-Tx® Abutment, incl. Titanium housing with processing replacement male black, Block-out spacer white and four different retention inserts, GH 4.0 mm 30810-04 iSy® Locator R-Tx® Abutment, incl. Titanium housing with processing replacement male black, Block-out spacer white and four different retention inserts, GH 5.0 mm 30810-05 iSy® Locator R-Tx® Titanium housing with processing insert black (4 units) 30013-01 iSy® Locator R-Tx® Analog, Ø 3.35 mm, aluminum (4 units) 30014-01 iSy® Locator R-Tx® Impression coping, polyethylene (4 units) 30017-01 iSy® Locator R-Tx® Processing spacer, polyethylene (4 units) 30018-01
Locator® R-Tx® components Description Art. No. Locator® Block out spacer, white (20 units) J2253.0401 iSy® Locator R-Tx® processing insert, black, polyethylene (4 units) 30012-01 iSy® Locator R-Tx® Retention insert, grey, ZERO RETENTION (4 units) 30001-01 iSy® Locator R-Tx® Retention insert, blue, LIGHT (4 units) 30002-01 iSy® Locator R-Tx® Retention insert, pink, MEDIUM (4 units) 30003-01 iSy® Locator R-Tx® Retention insert, white, STRONG (4 units) 30004-01 Color and Shape of Retention Inserts Manufacturer: Zest Anchors, LLC, 2875 Loker Avenue East, Carlsbad, California 92010, USA 33 This is iSy®
Locator® components Description Art. No. iSy® Locator® Abutment, GH 1.0 mm P2253.4010 iSy® Locator® Abutment, GH 2.0 mm P2253.4020 iSy® Locator® Abutment, GH 3.0 mm P2253.4030 iSy® Locator® Abutment, GH 4.0 mm P2253.4040 iSy® Locator® Abutment, GH 5.0 mm P2253.4050 Locator® Male processing packages (2 units) J2253.0102 Locator® Male processing packages for extended range (2 units) J2253.0112 Locator® Impression cap (4 units) J2253.0200 Locator® Analog (4 units) J2253.0340 Locator® Block out spacer, white (20 units) J2253.0401
Locator® components Description Art. No. Locator® Processing insert, black (4 units) J2253.0402 Locator® Replacement male, clear, STRONG, Div.: 0°–10° (4 units) J2253.1005 Locator® Replacement male, pink, MEDIUM, Div.: 0°–10° (4 units) J2253.1003 Locator® Replacement male, blue, LIGHT, Div.: 0°–10° (4 units) J2253.1002 Locator® Replacement male for extended range, green, STRONG, Div.: 10°–20° (4 units) J2253.2004 Locator® Replacement male for extended range, orange, MEDIUM, Div.: 10°–20° (4 units) J2253.2003 Locator® Replacement male for extended range, red, LIGHT, Div.: 10°–20° (4 units) J2253.2002 Locator® Replacement male for extended range, gray, NO RETENTION, Div.: 0°–20° (4 units) J2253.2000 Color and Shape of Retention Inserts, LOCATOR, LOCATOR R-Tx and R-Tx, ZEST and Zest Dental Solutions are registered trademarks of ZEST IP Holdings, LLC. Manufacturer: Zest Anchors, LLC, 2875 Loker Avenue East, Carlsbad, California 92010, USA 35 This is iSy®
Lab components and instruments Description Art. No. iSy® Lab kit, Contents: 1 lab analog, 1 lab base, 1 iSy® Lab abutment screw P3010.8001 iSy® Lab analog P3010.7010 iSy® Implant analog (for printed and cast models) P3010.7012 iSy® Handle for implant analog P3010.7500 iSy® Lab base P3010.7020 iSy® Lab abutment screw P4006.1614 iSy® Lab abutment screwdriver P5310.6060 iSy® Abutment collet for universal holder P3010.0100 Universal holder J3709.0015
Lab components and instruments Description Art. No. iSy® Modeling aid for titanium base CAD/CAM, Ø 4.5 mm P2244.4402 iSy® Modeling aid for titanium base CAD/CAM, Ø 5.2 mm P2244.5002 iSy® Plastic coping for hybrid abutment on implant base, with antirotational mechanism, burn-out, (POM) P2553.0025 iSy® Plastic coping for cemented crown on implant base, with antirotational mechanism, burn-out (POM) P2553.0020 iSy® Plastic coping for cemented bridge on implant base, without antirotational mechanism, burn-out, 2 units (POM) P2553.0010 Locator® R-Tx® Retention insert tool, stainless steel with plastic grip 30021-01 Accessories Description Art. No. iSy® X-ray planning foil P5300.9011 Prosthetic tray Universal without content J5330.8700 iSy® Macro model, scale 3:1 P8010.1010 37 This is iSy®
Quantity Description Art. No. Order iSy®.
iSy® contact. Sender/Office stamp Please contact me by phone. Please arrange an appointment for a visit. HEADQUARTERS CAMLOG BIOTECHNOLOGIES GMBH Margarethenstr. 38 4053 Basel Switzerland Fax +41 615654101 info@camlog.com www.camlog.com Client information: Last name, First name Practice Address State ZIP code, city Phone, fax E-mail Date/Signature 39 This is iSy®
iSy® notes.
iSy® notes. 39 This is iSy®
HEADQUARTERS CAMLOG BIOTECHNOLOGIES GMBH Margarethenstr. 38 4053 Basel Switzerland info@camlog.com www.camlog.com DEDICAM®, iSy® and Promote® are registered trademarks of CAMLOG Biotechnologies GmbH. They may however not be registered in all markets. CAMLOG Biotechnologies GmbH may market products only upon clearance and approval by the respective national authorities. Therefore, not all products may be available in your country. LOCATOR® is a registered trademark of ZEST IP Holdings, LLC. ©2019 ZEST Anchors LLC. All rights reserved. Rights to changes reserved M-0290-BRO-EN-GLO-ISY-04-092021 Manufacturer of iSy® and individual DEDICAM® products: ALTATEC GmbH, Maybachstr. 5, 71299 Wimsheim, Germany
RkJQdWJsaXNoZXIy MTE0MzMw