51 DEDICAM Product Catalog 2019 IMPLANT PROSTHETICS Directly screw-retained bridges for other implant systems Material: titanium alloy (Ti6Al4V) Precision milled surface Material: cobalt chrome alloy Precision milled surface Directly screw-retained bridges incl. abutment screws, attachments are charged separately Suitable for/compatible with: Biomet® 3i OSSEOTITE® Ø: 3.4 mm 4.1 mm 5.0/6.0 mm Biomet® 3i OSSEOTITE® Certain® Ø: 3.4 mm 4.1 mm 5.0/6.0 mm Dentsply® Implants Frialit® + XiVE® Ø: 3.4 mm 3.8 mm 4.5/5.5 mm Dentsply® Implants Astra Tech OsseoSpeed® TX Ø: 3.5/4.0 mm 4.5 / 5.0 mm Nobel Biocare® NobelReplace® Ø: NP 3.5 mm RP 4.3 mm WP 5.0 mm 6.0 mm Nobel Biocare® NobelActive® Ø: NP 3.5 mm RP 4.3/5.0 mm Nobel Biocare® Brånemark System® Mk III Ø: NP 3.5 mm RP 4.1 mm WP 5.1 mm Straumann® Tissue Level Ø: RN 4.8 mm WN 6.5 mm Straumann® Bone Level Ø: NC 3.3 mm RC 4.1/4.8 mm Zimmer® Dental Screw-Vent® Ø: 3.5 mm 4.5 mm 5.7 mm 3.45 mm 3.75 mm 4.1 mm 4.8 mm In addition to CAMLOG and BioHorizons implants, DEDICAM directly screw-retained bridges are available for other implant systems. The bridges are designed with the original DEDICAM CAD libraries using suitable CAD software and with the corresponding module. To this purpose, it is necessary to use the scanbodies suitable for the respective implant system (see page 15). The implant connections are modified according to the construction. Depending on the implant system, this allows restorations of implants with axial divergences of up to 50° to each other. Our free tactile model measurement service guarantees the optimum fit of the bridge onto the model. When you’re ready to send the master cast with removable, continuous gingival mask and undamaged implant analogs, please contact your local DEDICAM distributor. The abutment screws supplied, and also available separately, (see pages 92 and 93) can be used with the implant manufacturer's original screwdriver. A variety of attachments is available for the bridges (see page 88). Material Titanium alloy (Ti6Al4V) CoCr alloy Notes Abutment screws for the implant interfaces selected in the CAD software or the order portal are included. Names marked with ® are registered trademarks of their respective manufacturers (see page 93). See page 15 for corresponding scanbodies See pages 92 and 93 for corresponding abutment screws
RkJQdWJsaXNoZXIy MTE0MzMw